Wheels that work, part numbers (1 Viewer)
- Thread starter Corbet
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I thought they shipped in individual boxes. Two of mine had a dent in the lip.
Another shout for SCS wheels. Inspired by @cruiserpilot I went a slightly different route with the Gen5 wheels vs the F5. This was in large part due to availability where I am, but I'm very happy with the look. Details are: 9"x17" 3.5"BS (-38mm offset) wrapped in 285/70R17 KO3s. Vehicle is sitting on a OME lift (previous owner), though I don't know the specs.
That's got old-school dish to it. Nice! Didn't realize they had added a design. No idea what that colour is, but
very cool!
Thanks! I think SCS calls the colour "Gloss Bronze".
Love the wheels!! do you have spacers?
did you have to re-gear given these are 17's and 70" tall tires?
Thanks.
Thanks. No spacers required. The -38mm offset (9" wide with 3.5" backspacing) seems to work out just fine, at least with the small lift I have. I was coming off a 10 year old set of Goodyears Wrangler Duratracs that were 33"x12.5" R15 (stock wheels). The 285/70/R17 works out to be just slightly shorter (32.7") and more than an inch narrower (11.2"). In terms of re-gearing, I'm 95% sure I'm stock. Previous owner may have re-geared, but based on the speedometer readings I get vs GPS speed I doubt the ratio's have been changed. Full disclosure though, my LC is 95% on-road.
Last edited:
They do not, but a member here was able to fit them by getting a machine shop to enlarge the center bore by 2mm, and they looked great. Wish I could remember their username.
I took a chance on a set of 16” steelies from a 2017 Tacoma. Research showed the modern truck 106mm hub bore wouldn’t be enough to clear the front hubs, but when I mounted them up, all 5 cleared. Snug, but fit.
Not sure if a QC issue or most modern steelies are actually measuring larger than factory on the hub bore, so take at face value here.
Not sure if a QC issue or most modern steelies are actually measuring larger than factory on the hub bore, so take at face value here.
jmccandless
SILVER Star
Chose to ignore any paint flaws and got these mounted up. They will be covered in dirt 90% of their life.
255/85/65 Toyo M-55s.
WPG Tax.
255/85/65 Toyo M-55s.
WPG Tax.
These look great.
Thread info compiled. AI assisted.
Here are the Nomad Arvo 17 x 8.5 -25 rims. I have stock axles, no spacers and no modificaations to the width. The tires are 285/75 r17 BFG All Terrain KO3. My suspension is a new OME heavy / heavy.
This tire is 33.8" x 11.3" per BFG
www.bfgoodrichtires.com
www.nomadwheels.com
I would have preffered a simple steel rim but this is really the only wheel I could find with the extreem by todays standards offset.
full story here:
forum.ih8mud.com
This tire is 33.8" x 11.3" per BFG
Shop All Terrain T/A KO3 Tires | BFGoodrich Tires
Even in the worst of conditions, the BFGoodrich All-Terrain T/A KO3 tire is made to grip. The serrated shoulder design and mud-phobic bars improve upon KO2 tire’s legendary mud and snow traction.
www.bfgoodrichtires.com
502SB Arvo Satin Black – Nomad Wheels
Patent #D1036343 • Heritage inspired vented window design• Color matched snap-on cap with debossed Nomad logo• FORMLITE construction out of A356-T6 aluminum for increased weight savings• Available in Satin Black for most truck fitments and Dusk finish for Subaru and other CUV fitments• Available...
www.nomadwheels.com
I would have preffered a simple steel rim but this is really the only wheel I could find with the extreem by todays standards offset.
full story here:
285/75r17
I have been searching for a long time for the right wheel and can not seem to find it. Tired split rims 25 years ago until I blew a tube on the freeway. I have had 70 series 16's but a little narrow and sit inboard a bit too much for me. I had some 16" tundra steel spares and liked the look...
forum.ih8mud.com
those look really good! nice findHere are the Nomad Arvo 17 x 8.5 -25 rims. I have stock axles, no spacers and no modificaations to the width. The tires are 285/75 r17 BFG All Terrain KO3. My suspension is a new OME heavy / heavy.
This tire is 33.8" x 11.3" per BFG
Shop All Terrain T/A KO3 Tires | BFGoodrich Tires
Even in the worst of conditions, the BFGoodrich All-Terrain T/A KO3 tire is made to grip. The serrated shoulder design and mud-phobic bars improve upon KO2 tire’s legendary mud and snow traction.
502SB Arvo Satin Black – Nomad Wheels
Patent #D1036343 • Heritage inspired vented window design• Color matched snap-on cap with debossed Nomad logo• FORMLITE construction out of A356-T6 aluminum for increased weight savings• Available in Satin Black for most truck fitments and Dusk finish for Subaru and other CUV fitments• Available...
I would have preffered a simple steel rim but this is really the only wheel I could find with the extreem by todays standards offset.
full story here:
285/75r17
I have been searching for a long time for the right wheel and can not seem to find it. Tired split rims 25 years ago until I blew a tube on the freeway. I have had 70 series 16's but a little narrow and sit inboard a bit too much for me. I had some 16" tundra steel spares and liked the look...
View attachment 3826280
View attachment 3826281
