What have you done to your Land Cruiser this week? (16 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

@lostmarbles

Tom - What "brand" of safari rack is that on your TLC? I'm thinking my "mule" could use a new set of saddle bags...

I don't think the roofrack had a brand as such. There were quite a few of that basic design around in Australia in the late 70s and early 80s. The front legs came down to the side-steps with four bolts each side taking advantage of the strength of those gussets that come off the chassis rails there (with the mid-point of those legs further braced using 2 bolts each side from the windscreen hinges). At the rear, the legs there weren't so firmly fixed. They rested on short pieces of thick angle-iron cantilevered off the chassis rails (and I used to watch them wobble in my rear-vision mirrors).

As for the box. I made that from marine-ply and we used to use that to store all our sleeping bags and clothes because it was perfectly weatherproof.

But about 10 years or so ago I decided it was all rather heavy so I dumped the lot (including the bullbar). I cut it all up for garden stakes, other projects, or just to go to the rubbish tip.

I even dumped the air conditioning once I saw the benefits of remaining "light" and realised that this country (ie. New Zealand now) doesn't really get hot enough on a regular basis to warrant it (and dumped all my rear seating too when our kids got so large that sitting in the back was really too awkward).

:beer:

PS. That photo was a lot earlier than 2008. (It would have been taken on my old Nikon F3 camera and in 2008 I would have converted it to digital form by shining the image on screen and photographing that with a digital camera.)
 
Last edited:
@lostmarbles

Tom - What "brand" of safari rack is that on your TLC? I'm thinking my "mule" could use a new set of saddle bags...


oldalbumsa3-jpg.1178220

Jeff, there's a company here in the good old US of A that makes a similar stout rack they are called GOBI racks. I hope this helps.

FJ40-Ranger-Top.jpg


Ranger-Front13.jpg


Ranger-Rear18.jpg
 
I don't think the roofrack had a brand as such

Thanks Tom. I was curious because it looked like it mounted differently than the Gobi. I've eye-balled the Gobi racks with more than a passing interest over the past few months.

Jeff, there's a company here in the good old US of A that makes a similar stout rack they are called GOBI racks.

Yes sir...Been lurking over on the "expedition build" thread for unexplained reasons. Trying to rationalize the $$$. I may just part with my worlds largest dryer lint collection and sneak one of the Gobi racks into the stall while the mule is not looking...
 
3 easy things today:


For the nearly 16 years that I've owned my truck the horn has been really anemic. The last time I used it I was embarrassed that I even bothered, it was hardly audible to the person I was was honking at and turned heads on the sidewalk from people wondering "what is that lame buzzing noise?" So, I bought the Harbor Freight horns that get generally good reviews, seem to be loud, and certainly cheap ($8) and went to install them today. After taking off one of my factory horns I was surprised how well made they seemed to be and got to wondering what the various screws I see did. Turns out they are tunable, yea. I turned out the center back screw that sets the depth of the magnet and also turned in the little adjustment screw (see pic) on the back that does, well, adjusting... They are 10 times louder than they've ever been! They are now as loud or louder than the HF horns and while a little higher pitched are still attention getting! Very much easier than mounting and bodge-wiring the HF ones!

fj40-horn.jpg


____________________________________________

I was inspired by your new found horn glory so I went out to see what I could do with mine. I had about 84 decibels and started fiddling with the two adjustments you mentioned. I got it up to 99 decibels playing with just one. I fiddled a bit more now I can't seem to get it to work consistently now. sometimes it works, sometimes not. My inspiration was deflated. Anyone know how these horns actually work so I can do better than trial and error. (mostly error now).
 
I love my Trasheroo... I carry firewood on the way out and trash in the way back in.

But, I've always hated the blank, black look... Especially since it started fading.

So I decided to glue on some patches that are associated with my Air Force career.... Major Air Commands (most no longer active), couple of locations (one long gone and the other seems to be in the process of being reactivated), etc.


Thank you for your service Danny! @pngunme. :cheers:
 
New carb, tank and tie rod ends. It's running awesome now, like its new. Only trouble is it appears the center arm needs rebuilt due to the steering locking up/binding up when you turn at low speeds. Anyone else have this trouble?


Sent from my iPhone
 
Snow chains-

Tom I know exactly how you felt. I have had to ask my family to get out and walk a couple of times too.....

As for chains I choose these instead of ladder chains:



image.webp

The offer more lateral grip in any off camber situation. They do not have the carbide spikes and as such are not the ultimate in traction but they can also be run on the street. SSC diamond blue is the maker sold by peerless. The cam lock style is easy to get on once you get used to it.

Pete
 
Pete, I agree with you that this style is a good chain. I would have to say that they are a very close second to the bar reinforced chain when traction on ice is needed. Occasionally driving that style on dry pavement doesn't hurt them near as much as the bar reinforced. I chose that style, in a quick fit system, for my wife's car since it will be driven only on snow over pavement. The quick fit has a heavy coated cable, with quick connect ends, for the loop that goes behind the tire, and inside the fender well. The cross bars attach to that cable, and then attach to a chain system that goes on the front of the tire.

I have used the cam locks before on a light truck ladder style chain, and I really like them. If I have a choice, I will choose the cam lock over any other type of tensioning device. Although, I will still use the king size rubber band with multiple S hooks as a back up tensioner in addition to the cam locks.

Don
 
I taped the inside of my horn button so it doesn't rattle when I let it warm up in the morning

I put new wheel bearing seals in and replaced the star tab washer things for the bearing adjustment on the front wheels.

Probably gonna work on rigging up a hand throttle today with a bike shifter from work.

Snapchat-8782210639373911365.webp
 

Users who are viewing this thread

Back
Top Bottom