Just ordered these, thx!I've been running those for 5+ years on both 100s, so for the price, the longevity is great!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Just ordered these, thx!I've been running those for 5+ years on both 100s, so for the price, the longevity is great!
might be looking for theseQuestion, does anyone know what the little plastic plugs that the OEM screw goes into on the fender lip?
Just realized the other side is missing them
It is easy to remove the key from the spare tire carrier… see this thread…I have a spare tire winch thingy somewhere in the garage but no key. Happy to give a way to some in need. Not sure the key is more than $49 at the stealership![]()
Great, whoever wants it, it is just shipping cost.It is easy to remove the key from the spare tire carrier… see this thread…
Pretty simple, I ended up cutting off the factory plug and wiring in a Deutsch connector to mate to the aftermarket lights, in my case Diode Dynamics. Works with the stalk factory fog light switch took all of 15 minutes. I ordered the crimper and Deutsch kit off amazon I can link in what I used if you are curiousIn need of assistance. I purchased the SAE Rigid fog lights to go with my front bumper. The lights come with Deutsch connectors almost same as the fog lights on the car. I was hoping it would be plug and play without the need for the harness it came with. The two connectors don’t seem to mate very well. Can anyone tell me if I would be able to cut the male end off the rigid harness and splice it into factory harness so I can control the fog lights from the factory knob on the steering column. The factory wires look to be a thinner gauge than the Rigid harness. Thanks.
You crazy bastard, you actually beat me to it lol. This was my plan for Blue when she is retired. Except slightly different. Pretty much the same though. Crazy job and good job being crazy!
Yes please, no issues with the difference in wire gauge? The stock harness can handle the load?Pretty simple, I ended up cutting off the factory plug and wiring in a Deutsch connector to mate to the aftermarket lights, in my case Diode Dynamics. Works with the stalk factory fog light switch took all of 15 minutes. I ordered the crimper and Deutsch kit off amazon I can link in what I used if you are curious
The truck is super nice, but what are the specs on that shred sled hanging on the wall? Been a minute since I’ve seen a nose guard on a skateboard!Got the wolfbox G900 Pro mocked up and working. Installed the Jerry can holder on the TCC bumper with a little help.
To do:
-wrap up install of the wolfbox and hard wire
-wire up the license plate light with some Deutsche connectors (loom is already run out to the swing arm)
-throw my Aussie plate I got when living in NSW in the OG spot on the tailgate
View attachment 3971837View attachment 3971838
I’ve built and ridden longboards/slalom boards for 25 years and while pricey this one is awesome! The trucks come setup exactly how I’d tinker with them to get the perfect feel (higher quality urethane bushings that are mixed and matched, wedges)The truck is super nice, but what are the specs on that shred sled hanging on the wall? Been a minute since I’ve seen a nose guard on a skateboard!
Is this 12 inch screen? Is it fit without interfearing with visors?Got the wolfbox G900 Pro mocked up and working. Installed the Jerry can holder on the TCC bumper with a little help.
To do:
-wrap up install of the wolfbox and hard wire
-wire up the license plate light with some Deutsche connectors (loom is already run out to the swing arm)
-throw my Aussie plate I got when living in NSW in the OG spot on the tailgate
View attachment 3971837View attachment 3971838
That’s rad! I’ve still got my dad’s 78 Duraflex Splinter. It’s fun to carve on, but I mostly ride 8.25” popsicles still. I’ve got my daughter (17 months) starting to roll around on her butt, she loves it!I’ve built and ridden longboards/slalom boards for 25 years and while pricey this one is awesome! The trucks come setup exactly how I’d tinker with them to get the perfect feel (higher quality urethane bushings that are mixed and matched, wedges)
![]()
Comet Cruiser Skateboard | The Best Cruiser for Beginner and Experts
Introducing the Comet Cruiser—a travel-tuned cruiser board built for the realities of the road. Learn to push, glide, turn and drift with confidence and ease.cometskateboards.com
added the nose guards because we’ve got some groms in the house
![]()
CENTURY Skateboard Nose Guard, nose bone, Sizes to FIT YOUR DECK - LIGHT BLUE | eBay
CENTURY Skateboard Nose Guard. You'll receive ONE Century Nose Guard and THREE #4 x 5/8" pan head wood screws.ebay.us
The other short board in the photos is a Landyatchz dinghy fender. They’re great too but a traditional skateboard deck construction and stiff. No stringers or fiberglass like the Comet.View attachment 3971849View attachment 3971850View attachment 3971851
It is the 12” model and I read that it interfered with the visors but I don’t seem to have that issue. I have a 98 so my guess is that’s part of it. It’s very close.Is this 12 inch screen? Is it fit without interfearing with visors?
I'm about to try the 3 camera version with front bumper camera - not sure about the 12 inch fits in between visors.
![]()
WOLFBOX G900 TriPro Bumper Version 3 Channel Rearview Mirror
Born for off-road adventure, the G900TriPro introduces the industry's first front bumper camera, helping you effortlessly spot obstacles ahead and conquer every unknown road. Crystal Clear Details with IMX678 Sensor Featuring Sony IMX678 sensor technology, the G900TriPro delivers exceptional...wolfbox.com
So I did the same thing a number of years ago. At the time I figured everything was close enough I would run it without too much worry. You comment made me worry again so I checked...Yes please, no issues with the difference in wire gauge? The stock harness can handle the load?