Sorry to hear about the hit, time for a new aftermarket front bumper?
What have you done to your 100 Series this week? (32 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
@Christian
Sorry about the black ice.
Is your 100 turbo diesel or gas? And is it manual or auto?
What have I done to my 100 this week?
Removed slee skids, warn 12k, and replaced a heater t. Putting the beast back into daily driver mode and putting it on a diet.
Why you taking your LC back to stock? too much weight with the bumpers? how much does the rear bumper weigh? Im in Chapel Hill
See pm.
Not all the way back, still have 2.5 inch lift, sliders, front Arb, and front and rear diff locks.
What upholstery is that? Link?
Formulaonehd
NWZ - The storm is here
Nice steps, and nice 80 up front
Formulaonehd
NWZ - The storm is here
Went Storm chasing as i always do at this time of year, helps when you have a cyclone nearby. We have an LX and 105 series so took them both out and our eye in the sky helped us find a secret waterfall too!
kelly saad
Supporting Vendor
theophilus
SILVER Star
Toyota (I used 'PartSouq' and was impressed!)
9091706045 Quantity 2 (gaskets - $1.15 from PartSouq, $25 at local Lexus dealer)
9418561000 Quantity 4 (nuts)
9151561035 Quantity 4 (bolts)
Borla 14814 (I bought off amazon). Note: This did not come with a gasket for the pipe-pipe join. (not sure if you could use one or not) but it did come with nice stainless clamp to join the middle muffler pipe to the back resonator pipe.
https://www.amazon.com/.../ref=cm_sw_r_tw_dp_U_x...
I used Lisle Exhaust Hanger pliers, and I still had to use two hands and all my strength (maybe I'm getting old). I tried using an impact gun on the exhaust flange bolts, and that worked for 1 bolt, I had to angle grinder the other three and the clamp bolt. I used a 14 mm for the main exhaust flange bolts. If I had it to do over again, I'd borrow another set of jack stands and give myself a few more inches of room.
First Startup and Rev:
View attachment 1889764 View attachment 1889764
Last edited:
Formulaonehd
NWZ - The storm is here
NIce! and good o know your little helper was there learning the Cruiser/lexus ways!
Did you have a hard time removing the headers?
theophilus
SILVER Star
I did not tackle headers this time. I left the headers, the cats, and the crossover pipe in place and just replaced the middle muffler and back.
It was sometimes challenging finding things my helper could do, but we found enough that he said he enjoyed it. Sure beat crawling out and climbing off the floor every time I needed a socket or pliers.
What nav system is that? How did you get spotify and waze?
It’s a Grom vline, little computer that hooks up to the cd port that you can plug your phone into... expensive but good solution to bring our nav system up to date
Agreed. As practical daily mods go, it's the best money I've spent on mine.
Added my Scangauge II to the truck and gave it a wash today. Still need to see what other options are out there for monitoring on the Scangauge.
A little ski camping, Squaw to Heavenly to Kirkwood x2:
So that's the VL2 system? More pictures of the interface please. What's the climate control and trip info pages look like? Like you said, it is a bit pricey at $550ish but for what it does, I'd rather do that than anything else.
