What have you done to your 100 Series this week? (49 Viewers)

[Jfcol]

^^Sharp looking rig! Need some 33's now to make it pop.

Thanks. Tires and sliders are next on my list. Already added the Bora 1" spacers.

 

[reznunt]

Took her to the mountain to get some fresh country air, almost a mile above sea level and she ran like champ. Nearing sunset, the ray hits the pearl in the vinyl wrap and make it look awesome.

One of the best looking rigs on here IMO.

 

[viducce]

Last weekend did plugs, cleaned MAF, cleaned TB, changed air filter. This morning changed T's, wasnt really concerned about them but glad i did it cause they didnt look good. Also changed fuel filter today, dont think it was necessary but it got done. Im at 140k, pretty much solid on maint. at this point.

View attachment 1625134

They look like ancient ceramics ...

 

[FxFormat]

One of the best looking rigs on here IMO.

Thanks man, didn't have a big budget for mods like most people here, so I just try to keep it clean. Next up is a custom low profile safari rack, when the weather is warmer i can fabricate one outside.

 

[Kabanstva]

Took her to the mountain to get some fresh country air, almost a mile above sea level and she ran like champ. Nearing sunset, the ray hits the pearl in the vinyl wrap and make it look awesome.

Why can't some company make wheels like this in factory spec with OEM offsets! I would have a set by now, just don't want that kind of aggressive fitment despite it looking badass!

 

[Drogon]

 

[FxFormat]

Why can't some company make wheels like this in factory spec with OEM offsets! I would have a set by now, just don't want that kind of aggressive fitment despite it looking badass!

Hey for what it’s worth I haven’t had any rubbing issues with these. A couple other people have these wheels with the same offset and no one has reported any problem either. As long as you don’t run crazy wide 315 tires you should be okay with a +25 offset.

 

[bucfl]

What year is this sweet looking ride?

Took her to the mountain to get some fresh country air, almost a mile above sea level and she ran like champ. Nearing sunset, the ray hits the pearl in the vinyl wrap and make it look awesome.

 

[FxFormat]

What year is this sweet looking ride?

It's a 2001 with some modified eBay tailights to look like the 06-07.

 

[1sar39]

Been a busy week working on the LX. Hit 200k not too long ago and figured it was time to give her some attention.

Picked up some Fuel Anza wheels I found on Craigslist and had them installed. I installed new WTV-UK globes on all 4 corners (ride is so much better now), Slee 30mm spring spacers in the rear, Japan 4x4 AHC spacers, and a 40in light bar on the roof rack. I plan on getting started on building some rear storage drawers next weekend.

 

[TheForger]

Been a busy week working on the LX. Hit 200k not too long ago and figured it was time to give her some attention.

Picked up some Fuel Anza wheels I found on Craigslist and had them installed. I installed new WTV-UK globes on all 4 corners (ride is so much better now), Slee 30mm spring spacers in the rear, Japan 4x4 AHC spacers, and a 40in light bar on the roof rack. I plan on getting started on building some rear storage drawers next weekend.View attachment 1626459

Nice rig man!! Is that a custom roof rack?

 

[TheForger]

Replaced the old OEM shocks with new Tough Dog 53mm RALPH shocks from @reevesci. Next up are the 9-stage adjustable rears and then TB’s, those will probably be done closer to Spring Break or Easter.

 

[1sar39]

^ Thanks, man! Yeah, I built the rack. It was an easy build. Just 2x2 angle iron, and 1in square tubing. Built the front/ rear bumper, and the sliders, too.

 

[Somebodyelse5]

 

[Somebodyelse5]

^ Thanks, man! Yeah, I built the rack. It was an easy build. Just 2x2 angle iron, and 1in square tubing. Built the front/ rear bumper, and the sliders, too.

DUDE! do you have a build thread or anything write ups on the builds? They look great!

 

[1sar39]

DUDE! do you have a build thread or anything write ups on the builds? They look great!

Thanks! I never started a build thread. Wish I did .

 

[camino70]

Went from

2757016

• camino70
• Jan 30, 2018

To

2757018

• camino70
• Jan 30, 2018

I put the Lexus center caps from the 16's on, but they don't fit very well and I wound up putting the matching Toyota caps on. Is there a matching Lexus center cap out there? Any chance y'all have a pn I can search for?
Tia

 

[TheForger]

I put the Lexus center caps from the 16's on, but they don't fit very well and I wound up putting the matching Toyota caps on. Is there a matching Lexus center cap out there? Any chance y'all have a pn I can search for?
Tia

Wish I could be more help with picking the correct style, but here are pn's for the 3 different wheel cap styles that were offered for the 100 series LX:
42603-60231
42603-60410
42603-60420

 

[LandCruiserPhil]

Finished collecting LCA parts. Time to get busy

View attachment 1619304

Are those poly bushings?

 

[LandCruiserPhil]

Shore power outlet to power the fridge and relocated the trailer outlet into the bumper on my 2D BECH Lexus. Hitch mod next.