surfpig
The Anti-Tech
Enjoying the sierra nevada mts in the LX-450 labor day weekend
![]()
![]()
![]()
Lovin the new BFG's KO 2's 285-75-16
![]()
Long Lake, Soda Springs
![]()
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Enjoying the sierra nevada mts in the LX-450 labor day weekend
![]()
![]()
![]()
Lovin the new BFG's KO 2's 285-75-16
![]()
Long Lake, Soda Springs
![]()
Nice picnic spot...
Hike down the trail a ways. Spend a few nights. Mind-blowing...
View attachment 1130890
I'm planning this real soon, any tips or gotchas or is it pretty straight forward?replaced the motor and transmission mounts. an engine lift of sorts
View attachment 1130858 View attachment 1130860
Nice picnic spot...
Hike down the trail a ways. Spend a few nights. Mind-blowing...
View attachment 1130890
Nice picnic spot...
Nice!!!
Not sure what side I would hike down on Palisade creek trail, west side by long lake or off of soda Springs rd by Wabenna creek.....both look rough....theres a bridge that crosses over nor fork american to access both sides...
Nice picnic spot...
Hike down the trail a ways. Spend a few nights. Mind-blowing...
View attachment 1130890
Whoa. I really need to take a little trip south for a little adventure with you and the fam.Nice picnic spot...
Hike down the trail a ways. Spend a few nights. Mind-blowing...
View attachment 1130890
Not I. I would do a ten, twenty back in the day, mrs surfpig was a little more bold... Daughter would consider that jump. She's done like a 40'.Did you do some cliff jumping?? looks like the perfect spot
it's somewhat straightforward if you use a cherry picker. driver side was easy since the engine lift hook/bracket is on that side. therefore its easy to get adequate room to R&R the mount. on the paasenger side, i had to place a bottle jack between the top of the front diff and the motor mount bracket to get enough clearance. this was in combination with the cherry picker. i also had to disconnect the upper coolant lines and fan shroud. trans mount is cake.I'm planning this real soon, any tips or gotchas or is it pretty straight forward?
DUHWhoa. I really need to take a little trip south for a little adventure with you and the fam.![]()
It ain't the San Gabriel river.
![]()
Water.What do you call that stuff falling off the rocks?
whats the benefit of 100 pads, better grip, more surface area?Replace front axle seals/gaskets/rotors with 100 series brake pads. Took my time (12 hours) later job all finished.
Thanks to Dan for the parts.