Haha, that sucker fell out on my 3rd gen 4runner once. I heard the noise as the bolt backed out and fell onto the road and was able to go back and retrieve it. Talk about body roll!
What Did You Do with Your 80 This Weekend? (42 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Little something. Front RD132 & Rear RD142
Installed a Wits’ End spare tire leveling kit that I scored used from another mudder. Got an additional 3” of ground clearance at the front of the tire.
What’s the move on affixing the wiring harness that needs relocating with this kit? I zip tied it to the gas filler but maybe there’s a better way?
Before and after:
What’s the move on affixing the wiring harness that needs relocating with this kit? I zip tied it to the gas filler but maybe there’s a better way?
Before and after:
discovered a rear seatbelt won't cinch tight enough at the waist for my kids in the back
had all 4 belts rebuilt last Aug/Sept but just realized this when i removed the booster seats. contacting the vendor today. i really don't want to send my belts back, but i feel they should make it right and put the stops where they belong. all four are in different spots
speaking of which, where IS the proper spot? a measurement from the lower mounting point to stop, F & R, would be helpful!
more details in the seatbelt thread: Seat Belt Replacement - https://forum.ih8mud.com/threads/seat-belt-replacement.1289609/post-14975175
had all 4 belts rebuilt last Aug/Sept but just realized this when i removed the booster seats. contacting the vendor today. i really don't want to send my belts back, but i feel they should make it right and put the stops where they belong. all four are in different spots
speaking of which, where IS the proper spot? a measurement from the lower mounting point to stop, F & R, would be helpful!
more details in the seatbelt thread: Seat Belt Replacement - https://forum.ih8mud.com/threads/seat-belt-replacement.1289609/post-14975175
Certainly not in a weekend but I thought probably a good time to show off my build now 
Picked it up in 2019 with a poorly done lift, no rear bumper, a rickety front bumper and 260k miles.
Before:
After: (a ton of cleanup/PM under the hood, mechanical upgrades and mods) - now, it is triple locked, new Ironman control arms, Dobinson springs and lots of other goodies including that very custom cage:
Picked it up in 2019 with a poorly done lift, no rear bumper, a rickety front bumper and 260k miles. Before:
After: (a ton of cleanup/PM under the hood, mechanical upgrades and mods) - now, it is triple locked, new Ironman control arms, Dobinson springs and lots of other goodies including that very custom cage:
Back to OEM plug wires from the PO's import direct O'Reilly special. Ultimately chasing a fuel dilution trend, following most recent Blackstone results, with a few possible factors - don't think wires were a culprit, but had it on the to-do list & making sure fuel/ignition systems are working correctly. Checking things off the list before pulling injectors for service (parts on the way). Compression test passed with mostly flying colors at 235k, other than #5 being a bit lower than the rest, although still healthily above spec. Going to repeat later. We'll see how this pans out. Not super excited about upper intake, but it'll be fine. Good time for while-you're-in-theres, which are in the mail.
Last edited:
Buddy of mine bought this 40th with 113k on it via BAT and shipped it here for a Dobinsons IMS lift and bumper with Come up 9.5
Looking good
Looking good
Dilemmas in the Land Cruiser Parts World.
Found an unobtainium center console surround for a manual, and just got the boot cover in for it the other day. Unfortunately, looks like the cover is correct for the FZJ80, but the surround is most likely for an earlier FJ80? I should have done my research before buying the surround, which I paid a small fortune for.
Found an unobtainium center console surround for a manual, and just got the boot cover in for it the other day. Unfortunately, looks like the cover is correct for the FZJ80, but the surround is most likely for an earlier FJ80? I should have done my research before buying the surround, which I paid a small fortune for.
Curious how they work out. My LX450’s leather is shredding now. I can either replace with new leather covers that’s going to cost me roughly $500-600 or I get something else to wrap around the leather. I want some cloth like material to keep cool on trails and also grab my butt from slipping.
surfpig
The Anti-Tech
Biennial smog test. Of course it passed.
I've been happy with my Carhartt covers from Covercraft so far, they might be of interest. Fitment is nice, no issues in the sun and heat, and I slide around much less.
jomelo
SILVER Star
@Alpine4X4 yes that is not the right console for the 95-97 model. This is one I had printed for my truck and you can see the differences (curves up to the dash, etc). I deleted the little change holder because it just caught dirt.
Last edited:
I had an exhaust leak that sounded like an import. So I took off the cats and no more exhaust leak.
No it doesn’t sound like a V8 but has a rumble. Wasn’t going for performance but wanted to fix the leak and not pay for new cats.
No it doesn’t sound like a V8 but has a rumble. Wasn’t going for performance but wanted to fix the leak and not pay for new cats.
SFROMAN
SILVER Star
I have the Lseat leather covers but I don’t want to destroy them too fast. These covers have been in my tow rig for around 3-5 years and they flat out work. That small front pocket is perfect.
Drove it across the state.
I ordered seat bottom for driver’s side from MegaZip and covers from Covercraft (carhartt canvas). Do I need to cover the seat bottom in leather or cloth before putting on the Carhartt covers?
Added a Slee rear bumper. A bit more finnicky to install than I had assumed. Thanks @bonestock for all the help.
Last edited:
Any new smells? I've read this can make your exhaust smell dirtier
Haven’t smelled anything yet.
