Are you leaving the bumper as is, or adding the wings?
What Did You Do with Your 80 This Weekend? (17 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Installed Radius @Delta VS finally. Also drop brackets for the swaybar up front since i've been riding with it disconnected for the past year or so. Put in a new crank position sensor because I thought the original one died, but it was actually me shorting the harness with the engine mount bracket and ultimately cutting it. that was some tight space to work in and fix. Determined that sometimes you can order a cheaper after market version of a part that is an actual OEM part but a lot cheaper.
bpenn1980
SILVER Star
Not delta. Their stuff always comes within days.
It looks like the NPS(Grand Canyon) is trying to limit day use access extremely at toroweap and the other overlooks located on the Kanab plateau.
Please comment and share this link with any like minded individuals in an effort to retain our access to some beautiful back country.
You can read more here.
forum.ih8mud.com
Please comment and share this link with any like minded individuals in an effort to retain our access to some beautiful back country.
You can read more here.
Day Use Restrictions Proposed for Tuweep Area of the Grand Canyon
The National Park Service is proposing to implement a day use reservation/fee system for the Tuweep area in the Grand Canyon. Because of the rugged 4WD roads that access this site, this area is a popular destination for off-roaders who want to enjoy a remote, primitive experience of the Grand...
forum.ih8mud.com
Last edited:
Just curious, have been considering the delta rear for my 80. They told me 6-14 weeks leadtime. All small items I've purcashed from them have come quickly,.
It looks like the NPS(Grand Canyon) is trying to limit day use access extremely at toroweap and the other overlooks located on the Kaibab plateau.
Please comment and share this link with any like minded individuals in an effort to retain our access to some beautiful back country.
You can read more here.
Day Use Restrictions Proposed for Tuweep Area of the Grand Canyon
The National Park Service is proposing to implement a day use reservation/fee system for the Tuweep area in the Grand Canyon. Because of the rugged 4WD roads that access this site, this area is a popular destination for off-roaders who want to enjoy a remote, primitive experience of the Grand...
Kanab, not Kaibab Plateau. Granted Kanab being limited is bad too.
Good catch!!!! I guess that is the rattle snake gultch and kanab creek areas.
I left a comment supporting that the lands remain open as they are now with no increased and unneeded restrictions. Thanks for the linkIt looks like the NPS(Grand Canyon) is trying to limit day use access extremely at toroweap and the other overlooks located on the Kanab plateau.
Please comment and share this link with any like minded individuals in an effort to retain our access to some beautiful back country.
You can read more here.
Day Use Restrictions Proposed for Tuweep Area of the Grand Canyon
The National Park Service is proposing to implement a day use reservation/fee system for the Tuweep area in the Grand Canyon. Because of the rugged 4WD roads that access this site, this area is a popular destination for off-roaders who want to enjoy a remote, primitive experience of the Grand...
jfz80
Cruisin’
Switched back to 37s/AT’s
Some fine tuning yet to come.
Some fine tuning yet to come.
Last edited:
Installed new plugs.
Ran the old PK20R8 plugs a bit long at 53k miles and 5 years. Thought the little dots were interesting.
Ran the old PK20R8 plugs a bit long at 53k miles and 5 years. Thought the little dots were interesting.
Not bumpers....
COYS
SILVER Star
Got me some padding and sticky sticky
BillyGoatMTB
SILVER Star
Hahaha
Witchcraft, fluke secret squirrel witchcraft......
I don't know the 111 might look and see if it will accept a temperature. Probe, is there a f and a c on your dial for Fahrenheit and Celsius?
BillyGoatMTB
SILVER Star
Yes, it's a special little sticker isn't it? When I did my valve cover I got one of those from Joey.
BillyGoatMTB
SILVER Star
Good Morning Mud
It's head gasket / valve job time.
Wild coolant boil over/flash water situation with excellent compression...... The leak down showed air on #1 pushing into the upper cooling return hose to radiator. There were also few cylinders that had air leaking out of the exhaust and one intake valve.
I'll probably start a new thread once the head's done being tested and I verify there's not a crack.
I expected the head gasket to look much worse than it did, which ads to some of the concern and the head being verified? Good to go.
If the head's good, my plans to put it back together and run it and over the next year so slowly build a brand new factory. 1FZ on a new short block.
In preparation for a new motor I'll be replacing the wiring harness this go around.
Toyota..... Why oh why did you make that lower intake closed in without the wire harness being removed...........
It's head gasket / valve job time.
Wild coolant boil over/flash water situation with excellent compression...... The leak down showed air on #1 pushing into the upper cooling return hose to radiator. There were also few cylinders that had air leaking out of the exhaust and one intake valve.
I'll probably start a new thread once the head's done being tested and I verify there's not a crack.
I expected the head gasket to look much worse than it did, which ads to some of the concern and the head being verified? Good to go.
If the head's good, my plans to put it back together and run it and over the next year so slowly build a brand new factory. 1FZ on a new short block.
In preparation for a new motor I'll be replacing the wiring harness this go around.
Toyota..... Why oh why did you make that lower intake closed in without the wire harness being removed...........
BillyGoatMTB
SILVER Star
So awesome! I'm currently doing a head gasket and valve job but I'm putting a plan and motion to slowly start building a brand new 1fz over the next year. Super happy you passed smog and thanks again for your epic parts list.
Now, just need to find a good used supercharger.....
Last edited:
Use my 80 for work (as I always do) last week.
So… wasn’t planning on doing this, this weekend, but things happen for a reason… PO stripped out the bolts to the IAC… I got the screw out, but this happened, in the process… gonna crack open a beer and cry for a bit. Then I will pick myself up and fix it.
jemsec
Mach lll Club
Money will fix almost anything. All is not lost.
i use mine for work regularly....
Damn how did that happen? My screws are stripped too, but don't need cleaning yet. I will replace it will a regular metric bolts going forward.
