What Did You Do with Your 80 This Weekend? (55 Viewers)

[leonard_nemoy]

View attachment 2543748

Tip came off yes, they are going to remove the exposed bone and let it heal over

It's only a flesh wound...... it will heal up fine. I bet you will have a little permanent numbness on the tip. Mine always feels like I have something stuck under the half fingernail that grew back....

Goodluck man

 

[SoTexCruiserDoc]

Adventures with the family up on the Mogollon Rim. This is for those people who think Arizona is only sand and cactus. View attachment 2543453View attachment 2543461View attachment 2543473View attachment 2543471View attachment 2543474

Wow! Beautiful. Have to get there. I have a son in Prescott.

what lightbar on your bowfin? Thx

 

[SoTexCruiserDoc]

View attachment 2543748

Tip came off yes, they are going to remove the exposed bone and let it heal over

 

[TexasJack]

Holiday gift made useful
Non US throttle cable installed. Pretty easy job. Will definitely come in handy!
got it from vintageteqparts.com ( thanks @ToyotaMatt )


front panels come off

View attachment 2543647


Locate
View attachment 2543648

Thread

View attachment 2543649

Attach and Adjust

View attachment 2543650

Bingo!

View attachment 2543651










devo

I mostly use mine when I winch. If you don't throttle up, a winch will eat your battery.

 

[TexasJack]

View attachment 2543758

Mitre saw crushed the end of my thumb a few years back. They saved the thumb but it is mostly numb and I have bad arthritis in the first joint. Still works. Can't get through life without some bumps and bruises.

 

[ACACG8]

I replaced the tires, heater valve, idler pulley, driver seat gear thing and throttle cable(though it would fix the heavy gas pedal but No! )

I’ll figure out the gas pedal eventually

 

[RKTINC]

Snow and ice here. Tucked away for the winter. I keep mine too nice to expose to Land Cruiser Kryptonite ROAD SALT!!!

 

[RS6tofj80]

What is your headlight setup? Looks good.

it's a set of the Depo's with the inner shields done in high temp satin black

 

[bencallaway]

Somebody asked what a new 1fzfe sounds like. Well, there you go.

Specs:
-new short block, cams, head, valves
-new ignition system including coil and igniter
-all new sensors throughout
-new crank pulley-harmonic balancer
-Otramm cat back with new OEM y-pipe and forward cat
-injectors rebuilt and calibrated
-Timing set to 8* after break in period
-2400 miles on engine now

Revs extremely smooth through the power band. Slight drone with cat back and no resonator.

Cheers

I'm doing something very similar with my exhaust. Do you have a source/ part number for the y-pipe clamp?

90461-32031?​

 

[austinlwaits]

first post on mud but I’ve been stalking for a long time but I Added a snorkel and a set of rigid lights to the bumper till my ARB bumper comes in (hopefully by end of the week)
Changed the fluid on the transmission, transfer case and rear end, at some point the transfer case was filled with transmission fluid filled it back with 75-90 and the rear end fluid looked it was never changed in the 129k Miles of its life

 

[cheeese]

Went on a quick New Years Day trip to explore some spots at the Oregon Coast. Weather was uncooperative but the 80 stayed mostly dry inside.

 

[retrofive]

Went on a quick New Years Day trip to explore some spots at the Oregon Coast. Weather was uncooperative but the 80 stayed mostly dry inside.
View attachment 2544129

View attachment 2544131

View attachment 2544132

Hug Point? Cool spot.

 

[S.CarolinaFZJ80]

Went on a quick New Years Day trip to explore some spots at the Oregon Coast. Weather was uncooperative but the 80 stayed mostly dry inside.
View attachment 2544129

View attachment 2544131

View attachment 2544132

Is that the cave from Goonies?

 

[S.CarolinaFZJ80]

Drove it to the mountains.

 

[93yotasr5]

Who carries the new brush kit? Mine is likely getting tired, never been replaced at 225k

I just ordered one from eBay for $24. My alternator still charges fine for having 330k miles but I’m sure it will be happy with a new brush assembly. Brand New Genuine OEM Toyota Scion Alternator Brush Holder Assy 27370-75060 | eBay - https://www.ebay.com/itm/Brand-New-Genuine-OEM-Toyota-Scion-Alternator-Brush-Holder-Assy-27370-75060-/223520815923?_trksid=p2349624.m46890.l49292

 

[cvenom96]

Finished patching the quarters on both sides that had rusted out. It's not perfect but it'll be behind the bumper so whatevs. Main thing is I cut all the old rusted crap out. Driver's side was even worse. Next up is repainting an upper lift gate I got from @slow95z along with a new window seal.

 

[Tapage]

So far I'm seeing a big improvement over the Hella's, which surprised me since the Hella's were actually a really good light for the price. Distance is MUCH better with these. I got the 9" version of these lights. There's a bit more detail in the post I made in my build thread. Honestly, the only difference I'm aware of with the 8.5" and the 9" versions is that the 9" version that I have has daytime running lights (rectangle shaped lights around the outer edge of the light). Since the 80 doesn't use DRL, the 8.5" ones would work essentially the same.

you got a link for those hella .?

 

[sco00ter]

Bolted on my 4x4Labs ladder attachment. Now the back looks a bit more balanced alongside the giant wheel.

 

[efjayatee]

Bolted on my 4x4Labs ladder attachment. Now the back looks a bit more balanced alongside the giant wheel.


View attachment 2544243

Jealous

 

[93yotasr5]

Added a fold down table to my swing out carrier. Going to be adding a few other things to it in the near future.