What did you do with your 60 this weekend? (13 Viewers)

[Godwin]

Towing a boat this week doing some turtle research on the Choctawhatchee River in SE AL.

 

[dbbowen]

Towing a boat this week doing some turtle research on the Choctawhatchee River in SE AL.

View attachment 3910752View attachment 3910753View attachment 3910754

man you got the coolest job. I swear

 

[TheEngineer]

Alright gents, steering box is leaking. Do I send it off to red head and wait weeks or do I attempt a DIY for half the cost? Also going to check if anyone local to me does this.

 

[Godwin]

Alright gents, steering box is leaking. Do I send it off to red head and wait weeks or do I attempt a DIY for half the cost? Also going to check if anyone local to me does this.

Neither, swap in an 80 series box.

 

[cruisermatt]

Not the weekend and not my 60’s… but still cool enough to post hopefully?

Approaching the finish line on a FJ62 6.0/6l80, 80 Axle swap F/R, frame-off build, and in the testing stages on a 5.3/H55f in a 84 FJ60

 

[DocHanson]

Thanks to Gamiviti racks for the amazing products and install! Some tweaking yet left to do but I sure like the way it’s coming together

 

[Mike83FJ60]

what lights are you running on the roof rack ? they look good. I'm thinking of something similar. what did you use for the wiring channel down the side of the windshield?

 

[DocHanson]

what lights are you running on the roof rack ? they look good. I'm thinking of something similar. what did you use for the wiring channel down the side of the windshield?

Thanks, these are the KC Gravity pro (7 light version)

Gravity® Pro6 LED Light Bars

KC’s Gravity LED Pro6 LED Light Bar includes theall mounting brackets & hardware, and a complete wiring harness. Top quality LED Light bar system for Jeeps, Trucks and UTVs / ATVs.

www.kchilites.com

The strip down the side is also sold by KC.

Universal Wire Hider

www.kchilites.com

 

[Rodger1957]

Thanks to Gamiviti racks for the amazing products and install! Some tweaking yet left to do but I sure like the way it’s coming togetherView attachment 3913244View attachment 3913245

I wondered what my current 60 Would look like with 40 wheels & caps… Now I know. Thanks!

 

[RevISK]

62 chilling with @87freerunner

 

[sp73]

Continued baselining fluids etc. on my new to me FJ60. Front, Rear Diffs with Mobil 1 75W90. Added new drain/fill plugs courtesy of @cruisermatt

Also changed oil on my GX470

 

[Jamieson22]

Nothing fancy, just washed my 62 today.

 

[TheEngineer]

Neither, swap in an 80 series box.

I’ve got an ‘84 and from what I read on this it’s not as simple as a 62. I’d love to be proven wrong though, seems like a cool upgrade.

 

[Godwin]

I’ve got an ‘84 and from what I read on this it’s not as simple as a 62. I’d love to be proven wrong though, seems like a cool upgrade.

Yeah, an '84 would not be a direct swap due to the bolt pattern differences.

 

[4runner2FJ60]

I’ve got an ‘84 and from what I read on this it’s not as simple as a 62. I’d love to be proven wrong though, seems like a cool upgrade.

I just converted mine at the beginning of the year. Definitely not a direct swap, but not impossible. You will need to cut part of the inner fender to make room for the larger box. Then the top two holes will line up, and the bottom back will be very close. You can open up the holes in the box itself and also a little on the frame holes. Frame sleeves stay in place . Great mod and drives great. I can pm some pictures.

 

[cruiserinsanity]

I just converted mine at the beginning of the year. Definitely not a direct swap, but not impossible. You will need to cut part of the inner fender to make room for the larger box. Then the top two holes will line up, and the bottom back will be very close. You can open up the holes in the box itself and also a little on the frame holes. Frame sleeves stay in place . Great mod and drives great. I can pm some pictures.

That’s a lot easier than splicing another piece into the frame.

 

[TheEngineer]

I just converted mine at the beginning of the year. Definitely not a direct swap, but not impossible. You will need to cut part of the inner fender to make room for the larger box. Then the top two holes will line up, and the bottom back will be very close. You can open up the holes in the box itself and also a little on the frame holes. Frame sleeves stay in place . Great mod and drives great. I can pm some pictures.

If you can that’d be great!

 

[wngrog]

4Plus bumper install.


Toyota rivets suck

 

[RevISK]

Finally put this Conn-Fer rack on.

 

[wngrog]

Finally put this Conn-Fer tack on.

View attachment 3915125

Pimp