What Did You Do With Your 120 Today? (3 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

went camping with the fam
upload_2018-10-7_21-45-52.webp

emoji_u1f608.png
 
Did the headlights a couple of months ago on my wife's Subaru Forester that we sold and today was Sexy Lexy's turn. Yes I stole the name from another forum member. :cheers:

Before
IMG_0088.jpeg


After
IMG_0100.jpeg


Did the fog lights while I was at it as well. Might as well until they are replaced by a front bumper in the future.
IMG_0099.jpeg


The Passenger one was really BAD
IMG_0090.jpeg


And After, not too shabby.
IMG_0103.jpeg


IMG_0101.jpeg

I have another set in the garage that I bought off of eBay that are in better shape but I will wait until these go bad again in a few years and then use those back-up ones. :P
 
Did the headlights a couple of months ago on my wife's Subaru Forester that we sold and today was Sexy Lexy's turn. Yes I stole the name from another forum member. :cheers:

Before
IMG_0088.jpeg


After
IMG_0100.jpeg


Did the fog lights while I was at it as well. Might as well until they are replaced by a front bumper in the future.
IMG_0099.jpeg


The Passenger one was really BAD
IMG_0090.jpeg


And After, not too shabby.
IMG_0103.jpeg


IMG_0101.jpeg

I have another set in the garage that I bought off of eBay that are in better shape but I will wait until these go bad again in a few years and then use those back-up ones. :p

Very nice! Did you do a sealant??
I've read a 50/50 of urethane and mineral spirits is a good way.... google it before you try, but I've read that's a good sealant to keep the oxidation from occurring after the clearing
 
On Friday threw error codes for stuck valves in the emissions system. Limped home from work. Ordered Hewitt bypass kit which showed up yesterday. Installed in about 1.5 hours and I am an amateur at best. Everything runs like normal again and no error codes. Very happy.
 
I finally took delivery of my SSO front bumper after waiting 12 weeks! Then I had to wait another 2 weeks for shipping to the Virgin Islands and another 4 weeks for the right timing to do the install with some friends, whew! Love how it came out and worth the wait. I live for a challenge. The quality is amazing and the powder coat color I picked out seems pretty close. Let me know what y’all think.

476FE53C-33A7-4F5B-95A0-602CCAB1EAC5.webp


8FEF1E53-FC86-4A5B-B69E-F60EC67A246D.webp


32FFB0AF-E127-47D0-9185-E1409FA08736.webp


5DF5D82D-7278-4EFA-910C-8A4D6F736736.webp


D6699810-63AC-4306-ACF1-1A316F7572CC.webp
 
Looks great!!
 
We replaced both CV axles last night. I was fortunate that the local shop also had the knuckle seals in stock. Not sure why I didn't order the parts with those seals to start with, but one had been disintegrating for some time. The axles popped right out with a pry bar and the seals just took a little massaging.

I could not get the front diff drain plug opened to save my life, so I guess I did a 1/2 fluid change on that. I could tell that Thor had performed the last fluid change as both the filler and drain plug are slightly messed up. I was able to swap out the filler plug but I may have to figure something else out for the drain plug.

I think it was 4 hours of fun excluding dinner, kid time, and the like. Oh, and I also found some snow...

 
We replaced both CV axles last night. I was fortunate that the local shop also had the knuckle seals in stock. Not sure why I didn't order the parts with those seals to start with, but one had been disintegrating for some time. The axles popped right out with a pry bar and the seals just took a little massaging.

I could not get the front diff drain plug opened to save my life, so I guess I did a 1/2 fluid change on that. I could tell that Thor had performed the last fluid change as both the filler and drain plug are slightly messed up. I was able to swap out the filler plug but I may have to figure something else out for the drain plug.

I think it was 4 hours of fun excluding dinner, kid time, and the like. Oh, and I also found some snow...


lift and bumper look good. when do the running boards come off? :cool:;)
 
lift and bumper look good. when do the running boards come off? :cool:;)

Not sure. Most of the mods were actually to replace something already damaged or needing replacement. I'll need to keep the running boards until they break as well.
 
Swapped out the Toytec Superflex HD rear coils for Icon Overland's. Also replaced the brake lines all around with 2" extended Goodridge stainless steel lines.

If anyone needs a pair of Superflex HD coils with Airlift bags for cheap let me know;

EDIT- Springs and airbags SOLD!

IMG_9377_zpsqse0uysi.jpg
 
Last edited:

Users who are viewing this thread

Back
Top Bottom