Yep, their instructions are bad. Techstream is much easier!
What Did You Do With Your 120 Today?
- Thread starter kbahus
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
caz
Keystone Cruisers
Can you actually program the remote through Techstream? All I could manage to do was the immobilizer part. Still had to follow the song and dance for remote programming.
caz
Keystone Cruisers
Well that stinks, It was definitely in there for my 2004!
NMBruce
SILVER Star
Finished up three cargo door projects today that I have been working on for the last two Sunday's
This is a sneak peak, I will do a write-up on all three in my Build Thread. I really need to update it....
Easy Rear Cargo Handle mod using washers for less than $3 in hardware. Special Thanks to @Scat Adams for the grab handle idea!
Emergency cargo door latch. Special thanks to (Can't remember who came up with this idea).
And finally the Front Runner fold down table with cutting board that has been sitting in my garage for over a year and someone beat me to the install but I have photos on how to do it that I will share with the forum.
This is a sneak peak, I will do a write-up on all three in my Build Thread. I really need to update it....
Easy Rear Cargo Handle mod using washers for less than $3 in hardware. Special Thanks to @Scat Adams for the grab handle idea!
Emergency cargo door latch. Special thanks to (Can't remember who came up with this idea).
And finally the Front Runner fold down table with cutting board that has been sitting in my garage for over a year and someone beat me to the install but I have photos on how to do it that I will share with the forum.
How do you like that table? I've been eyeing it...
It's nice, it's heavy, and unfortunately mine came with some damage. My wood cutting board has a big chunk of filler on the back side (See photo below). And the bolts for the rubber stoppers were too long so they chipped away the powder coat. I have trimmed the bolts and touched up the powder coat.
I will comment more once I take it out for a test run.
I will comment more once I take it out for a test run.
Does it rattle at all?
tampacruiser95
Upgrades are coming.
Had new OEM muffler and tailpipe installed. And then put it up for sale.
Black Cat has your Radflo squeak mellowed a bit yet. I know have not been running that long but curious.
No rattle on the commute into work this morning. The thing is made really well.
I do need to maybe add a spacer to the back on the right side because it is a little flexed and when I closed the cargo door one time the table fell down. But I think straightening it out will prevent that from happening again.
NMBruce
SILVER Star
did the door pull and table, like them both. I want to add knifes and stuff like they did in Lexi
Yes, it’s totally gone. Just needed a few hundred miles.
Mocked up my TC Uppers because I’m a weirdo and excited.
COO!, what are the suspension set-ups in each of those rigs?
nice!
I haven't fully researched but have thought a bit about it... What's the non-dealer way to change to custom settings? Ergo: lock or not shifting from P; audible beep and/or light flash upon arm/disarm; how to reset window and roof features to auto down/up on one-push, on/off telescoping wheel, timing for auto-off lighting, etc....
Do you have a program on your dino XP that programs settings intot he key, that translates to the truck? Is there computer to OBDII interface to make those changes via program? Are there infuriating key motion to combination window switches, odo push0button, shifter sequencing to set these setting?
I know it probably reads very oddly, but they're legit questions.
To join this discussion of custom functions... There's the push and hold that lowers all windows, but AFAIK no all-close via button push. . . is there a key fob button pressing to close all windows?
The green GX is still on stock suspension, mine is an extended travel Radflo 2.5 setup, the FJ is on a full Fox setup with TC uppers and 35” Tires, and the 4Runner had a Toytec kit on it and 33’s.
