We’ve been tackling the Kentucky Adventure Tour for the past week in my ‘04 LX470, and today we finally finished! The last obstacle of the trip was a small water crossing through a river back to the main road, and I had a little hiccup… Half way through the water crossing I hit a rock and had to reverse before proceeding forward. When doing this, some water entered the cab through the passenger side doors and shortly after I lost power to my rear climate control and three window switches.
Here’s the kicker: each window (including the drivers window) works independently from its own door switch, but not from the drivers side switch panel. The car runs great, the passenger side fuse panel did not get wet, but the harness under the passenger door jam trim piece did. No fuses are blown, so needless to say I’m freaking out a bit and letting it spoil the last night of the trip. Any tips on correcting this? Does anyone have any experience with something similar?
Here’s the kicker: each window (including the drivers window) works independently from its own door switch, but not from the drivers side switch panel. The car runs great, the passenger side fuse panel did not get wet, but the harness under the passenger door jam trim piece did. No fuses are blown, so needless to say I’m freaking out a bit and letting it spoil the last night of the trip. Any tips on correcting this? Does anyone have any experience with something similar?