Well here is the reply from Rodney in Australia about the conversion. There is nothing about it that sounds cheap. Lol.
*****************************************************************************************************************************************
I don’t know what your budget is like so I have included 2 different options below where I hope that one will suit you perfectly. I have also attached our 4 page brochure.
1/ You can see if you can find a good second hand 100 series 1HD-FTE 5 Speed auto complete with drive plate assembly and transmission cooler and we can supply the rest.
We will supply the following:
Computer System, Heavy Duty Tip Tronic Nomad “or” Extreme Valve Body Assembly, Wiring Harness, Console Display, Lock-Up Switch, 3 Bar Map Sensor, TPS Switch and Mounting Brackets, Complete Centre Console with Tip Tronic T.bar Assembly, Hi/Low Lever Bracket, Rubber Cooler Line, 4 X Stainless Steel Hose Clamps and Chassis to Cross Member Plates $8500 inc gst + plus freight if required.
You will need to supply the following:
Second hand 5 Speed A750F Automatic Transmission from 100 series 1HD-FTE including Torque Convertor, Drive Plate Assembly, Engine to Transmission Sandwich Plate and Automatic Brake Pedal and Oil Cooler Assembly from the 80 series 1HDT or 1HD-FT. You will also need to change the tail shafts to auto from the auto Land Cruiser that is the same as yours.
“Or”
2/ The complete Heavy Duty “Genuine” Toyota 5 Speed A750 Automatic Transmission conversion with Heavy Duty Nomad Valve Body and Billet Torque Convertor pre-dyno tested is $17,900 inc gst “Not Fitted”.
OR $22,950.00 fitted in our Melbourne workshop
Wholesale Automatic Transmissions
The 5 Speed Conversion Includes:
Heavy Duty Toyota Diesel 5 Speed Overdrive Automatic Transmission
Nomad Tip Tronic Valve Body Assembly
Toyota 1HD-FTE Diesel Bell Housing (Suits all Toyota 6cly Diesels)
Heavy Duty Recalibrated Nomad Valve Body Assembly
1HD-FTE Diesel Torque Convertor (Suits all Toyota 6cly Diesels)
Toyota Drive Plate Assembly
2 X Extra Large Oil Coolers
Cooler Lines , Fittings Etc
Inhibitor Switch Assembly
Toyota Tip Tronic T.bar
Centre Console Assembly
Separate Noise Reduction Layer
Carpet Floor Mats
Wide Automatic Style Brake Pedal
Chassis Cross-member Plate
New Rear Rubber Mount
Throttle Position Switch and Mounting Plate Etc
Hi Low Lever Mounting Bracket
Full Synthetic Oil
Stand Alone Transmission ECU
Wiring Harness
Dash Display/Programmer
*Lock-Up Manual Control for 100% Engine Braking At The Touch Of A Button
*Built In Temp Gauge
*Fully Adjustable To Your Own Requirements
*Australian Back Up & Technical Support
***You will need to modify both front and rear tail-shafts to suit***
Freight via TNT/NQX Road Express is $385 inc gst (Insured).