Toyuzu Fj60 (Rootbeer Diesel Build) (3 Viewers)

[red66toy]

I found that those 3M scour/scrubber pads quickly ripped up the jute when I stripped my floors. You have to clear the jute from the pad some what often but it definitely grabs hold of the stuff!

 

[bluehawk]

May give that a try

 

[mcguirejohnson]

I usually use a big wire brush meant for welding. It will pull all of that stuff right up.

 

[bluehawk]

Any of you guys running the Isuzu motors, I need to know where I can find the oil filter housing for a 4BD2t? Here is a picture of one that I need

 

[bluehawk]

Those are pictures of doug720's setup

 

[doug720]

Have you tried Rudy and Tom's truck here in SoCal? They both sell used Isuzu parts.

If you can't find one, and you need one soon, I have the one off my spare engine you can use. Just find me one later.

Let me know.

 

[bluehawk]

Have you tried Rudy and Tom's truck here in SoCal? They both sell used Isuzu parts.

If you can't find one, and you need one soon, I have the one off my spare engine you can use. Just find me one later.

Let me know.

I looked at Tom's Truck Center and couldn't find anything. I've searched and searched and nothing. My take you up on the offer, but I may not be able to find a replacement.

 

[doug720]

I would call Tom's and Rudy directly, as both have way more parts then they list.

 

[bluehawk]

I would call Tom's and Rudy directly, as both have way more parts then they list.

Is that Tom's Truck Center in Garden Grove California? If so, I'll give them a call tomorrow. Thanks Doug for the replies.

 

[doug720]

Yes, and ask for the used parts guy. The regular parts people don't know the true stock.

Good hunting

 

[bluehawk]

Finally got all the monstaliner done. Even got the underside coated. Body goes back on next week.

 

[Cruiser Jimmy]

How many gallons?

 

[bluehawk]

How many gallons?

More than I wanted it to take, 4 gallons for the whole truck. The last gallon I put on, I finally figured out the whole process of applying it.

 

[the gimpey one]

Looking good bro!

 

[bluehawk]

Looking good bro!

Thanks, there is still a ton left to do.

 

[drillduty]

Wicked work buddy keep up the fire!

 

[bluehawk]

Wicked work buddy keep up the fire!

Thanks for the kind words. Now if I can remember how it all goes back together.

 

[bluehawk]

Got the oil pan gasket back on and oil pan bolted up. Got the cover on the bottom of the trans on. Had to persuade it with a hammer just a little bit for clearance.

 

[bluehawk]

 

[bluehawk]

Oh its getting close to going back together. Trying to line the chassis up with the body.