Steering Rack Replacement Questions (4 Viewers)

[schmeb2000]

Hello,
I am replacing the steering rack in my 2000 LC. I have a few questions that i hope you guys can answer. So I am getting new bushings and all that. I just need to know if i should get new spacers, bolts (maybe called studs) and banjo bolts. I plan on doing this myself before I replace the suspension so it will be easier to access. Any tips on how to replace the steering rack is greatly appreciated too. Thank you

 

[Petertn45]

Hi,
This is the big thread which should contain all tips and tricks if you haven’t gone through it.
It helped me to print out some steps and diagrams while I replaced mine. Shouldn’t be too hard as long as you take your time.
Good luck!

How To: Replace your own steering rack

I just wrote up this long how to for member who PMed me so i figured I may as well share it with the masses. 98 LC 200k seemingly well cared for miles, but this is def its first rack. Its now strictly for off road use. This is not a 1 banana job. But anyone can do it with a day, maybe a...

forum.ih8mud.com

 

[schmeb2000]

Hi,
This is the big thread which should contain all tips and tricks if you haven’t gone through it.
It helped me to print out some steps and diagrams while I replaced mine. Shouldn’t be too hard as long as you take your time.
Good luck!

How To: Replace your own steering rack

I just wrote up this long how to for member who PMed me so i figured I may as well share it with the masses. 98 LC 200k seemingly well cared for miles, but this is def its first rack. Its now strictly for off road use. This is not a 1 banana job. But anyone can do it with a day, maybe a...

forum.ih8mud.com

Thank you man I’ll look through that.

 

[OEMGUY0720]

A 17mm crawfoot wrench will come in handy in creating that leverage when you break loose the banjo fittings on the old steering rack. Also, I would suggest replacing all flexible power steering related hoses as they are likely brittle at this point. Check your hard lines as well for rust and corrosion.

 

[schmeb2000]

A 17mm crawfoot wrench will come in handy in creating that leverage when you break loose the banjo fittings on the old steering rack. Also, I would suggest replacing all flexible power steering related hoses as they are likely brittle at this point. Check your hard lines as well for rust and corrosion.

I am thinking about replacing the lines but it’s about $500 for all. It’s expensive right now.