- Thread starter
- #121
These 8" diffs are so cute. My old ass can toss them around with ease.
Builds Saudi 93 VX build-Tilda Bogue Service Station (7 Viewers)
- Thread starter wngrog
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #122
Going back together. Just got the call. Headed to Houston port to get a couple of 5 speed 100s. Back on this Thursday.
- Thread starter
- #123
I'm back. Mission 100 was a success. Long two days. Two more amazingly clean Saudi trucks. Meshal killed it again.
Red was even impressed (rare)
I got them unloaded and turned back on the 80. The front axle is almost rebuilt with OEM
Parts.
Red was even impressed (rare)
I got them unloaded and turned back on the 80. The front axle is almost rebuilt with OEM
Parts.
- Thread starter
- #124
Rear differential done. .
- Thread starter
- #125
I got a thousand bags of Toyota parts to redo the rear drum brakes I ordered for this thing before it even arrived. Finally got them all in today. Perfect timing.
Except the rear brakes were already brand new. They must have gotten rebuilt when @Meshal did the first refresh for the guy Doc bought it from.
Anyone need to rebuild a 70/80 rear drum axle? I gots the goods.
Except the rear brakes were already brand new. They must have gotten rebuilt when @Meshal did the first refresh for the guy Doc bought it from.
Anyone need to rebuild a 70/80 rear drum axle? I gots the goods.
- Thread starter
- #126
Next project. Trying to figure out how to make this switch work with the Harrops. Stay tuned
- Thread starter
- #127
Got the lockers wired up and they are not working. Probably just a ground or something. Will dig into it more later.
Pulled the 80 out to pop the thermostat off.
When I was driving it a few weeks ago Doc saw that the temp gauge was only a 1/4 up and figured it was missing the thermostat.
It had one but it's a quicker opening unit versus what we normally use here.
Old was a 74* C and new is 83* C
Buttoned it back up.
Took it out to burn in the brakes and see how it drives. Great. Brakes are great (no ABS), suspension is perfect. Steering is great.
Temp gauge creeped up to about 1/3 with the new unit.
Seems like this guage is more accurate than a glorified idiot light like a US spec truck
Pulled the 80 out to pop the thermostat off.
When I was driving it a few weeks ago Doc saw that the temp gauge was only a 1/4 up and figured it was missing the thermostat.
It had one but it's a quicker opening unit versus what we normally use here.
Old was a 74* C and new is 83* C
Buttoned it back up.
Took it out to burn in the brakes and see how it drives. Great. Brakes are great (no ABS), suspension is perfect. Steering is great.
Temp gauge creeped up to about 1/3 with the new unit.
Seems like this guage is more accurate than a glorified idiot light like a US spec truck
- Thread starter
- #128
Today is jewelry day
- Thread starter
- #129
One down. Perfection.
- Thread starter
- #130
Two and done. 
navydivedoc
GOLD Star
Perfect.
- Thread starter
- #132
I did not know if the passenger arm rest would work but it did. This truck is comfy.
- Thread starter
- #133
Had a couple of parts left to plug in.
Brake master and a 105 charcoal canister.
Bench bled
Pushed out all of the old fluid.
Also deep cleaned under the hood.
Brake master and a 105 charcoal canister.
Bench bled
Pushed out all of the old fluid.
Also deep cleaned under the hood.
- Thread starter
- #134
Hard to explain how clean this truck is underneath.
Do have part # you can share on the charcoal canister ?
navydivedoc
GOLD Star
- Thread starter
- #139
For the record it's not a direct fit. It's about 1/10th bigger so the bolts don't buckle back up on the bracket. Had to use a discreet zip tie.
Hoses match up 100%
But this is a non US non dopey epa truck
Hoses match up 100%
But this is a non US non dopey epa truck
- Thread starter
- #140
Polishing
