Builds Resto-mod on my 55 has begun (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Bodywork continues......

Front doors are started.... PS almost ready for primer.
PS front door bodywork.jpg
PS front door bodywork 1.jpg
 
Not to rush you but can you hurry up and get it back together so I can see it!
 
Front Seat Frame

I got this really cool Corbeau Front Seat frame for putting in buckets and my Tuffy box... Fits really nice..made for 55's. I think I'm going to put in the 80 series seats that I have. We'll see.:cheers:
Seat Frame.jpg
Seat Frame 1.jpg
 
Noah,
I bought it off a guy on craigslist a while back. Here's the Corbeau website with the link
Seat Brackets
It says "bench" by the FJ55 seat. I'll check the part# on the one I have and post it.
Hope you and your fam had a great Christmas...
 
Swami Brewtus predicts that a Corbeau charge is going to appear on his January Visa bill.........

Nice seat bracket. Thanks for the pics and the link! :D
 
I think I'm going for the Moab Corbeau seats in Black Neoprene....:cool: When's the next Pizza Port night? I'll try to make the next one for sure....

nice, chris is hosting his exchange student, tomas from dallas this week and they are talking about the port, will let you know......
 
Front end work

We'll, started back on the front suspension. We've got it mocked up with steering and now need to get the Panhard mocked up. Here's a couple of shots at ride height and full bump. It'll have 4" of up travel and 9" of down travel if we do it right.
Front suspension at ride height.jpg
Front suspension at full bump.jpg
Front suspension at full bump 1.jpg
 
Front inner fender trimmed```

I had to trim the front inner fender with the 80 box in there. Look awesome with the tires on it;p It's sitting at ride heighth in these shots....:D
Front Inner Fender trimmed for steering box.jpg
Front Inner Fender trimmed for steering box at ride height with KM2.jpg
Front Inner Fender trimmed for steering box at ride height with KM2 2.jpg
 

Users who are viewing this thread

Back
Top Bottom