Your friend should take out some advertisements on instagram if he has not already, that would be a good way to get some eyes on that IMO
Beaut of a table!
Official ONSC member buying/selling thread (10 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Beaut of a table!
I can check the compression on the one i have. I have two, one needs to be rebuilt for sure. The other one i have no clue.
Your saga with that truck is a constant rollercoaster. I'm selling it. I'm buying it back. Motor is getting a turbo. Nope, motor is toast, turbo for sale. Getting a v8. Well changed my mind, getting a om6whatever. Nope, not anymore, back to the 3fe.
Its a hoot to read about
I am patiently awaiting the 606 install. Gets my vote.
Guy sold the V8 out from under me, it's always needed a 3fe so I can drive it when I'm building the swap motor and getting the adapters, but I've had numerous 3fes get sold out from under me or turn out to be garbage. Turbo has never been for sale and was always going to to Logans truck my truck was just going to be to make sure it all works right before sending it Kenny's way. Only big change that was completely on me was the 2fe. It belongs in Brett's truck.Your saga with that truck is a constant rollercoaster. I'm selling it. I'm buying it back. Motor is getting a turbo. Nope, motor is toast, turbo for sale. Getting a v8. Well changed my mind, getting a om6whatever. Nope, not anymore, back to the 3fe.
Its a hoot to read about
A 45LV with a 2fe will be a beautiful thing. But hell there is still time and my spare 4bt may catch my eye again. Lol
(just kidding that thing had a cracked block and two pistons with holes in them.
Last edited:
sweet let me know, it doesn't have to be perfect in anyway, just driveable so I can get my rig back here an enjoy it for a bit while I collect parts.
jfz80
Cruisin’
I know. Right?!?
Pool table with a v8 would be the tits!
Pool table with a v8 would be the tits!
I’ve got a 3fe, and I don’t want an arm and a leg for it. Just an H55f and an LS bell housing.
By the way, I still have that 3fe flex plate from my h42 swap if you still want it.
Hot diggity is that all you want lolI’ve got a 3fe, and I don’t want an arm and a leg for it. Just an H55f and an LS bell housing.
By the way, I still have that 3fe flex plate from my h42 swap if you still want it.
Appreciate the flex plate, ended up sourcing one from a salvage yard.
Anyone have OEM fzj80 panhard bar? if so, how much would you want for it?
I might be swapping the adjustable pandhard for the delta VS panhard riser (and OEM bar)
Anyone want to buy an adjustable Dobinsons panhard bar?
I might be swapping the adjustable pandhard for the delta VS panhard riser (and OEM bar)
Anyone want to buy an adjustable Dobinsons panhard bar?
Last edited:
You can use the adjustable panhard bar with the Delta bracket. It allows for added adjustability to dial it in just right and allows for future mods.
I have been using a Slee adjustable pan hard with the Delta bracket for awhile now.
I needed about 3/16" longer than the stock bar to line everything up with New Slee 4" Heavy springs.
Start with it adjusted at the stock length and adjust as necessary.
If you can weld, eimkeith makes a weld-on panhard correction kit (PCK) that is far less expensive than the bolt-on Delta piece. It seems like I paid $100 for the Keith kit. Delta's is $275 and is not adjustable for lift height. Keith's kit is adjustable for different lift heights from 50mm to 150mm. It is a two piece kit. One piece welds to the panhard mount on the frame and the other welds to the panhard mount on the axle. My truck is at 3" and I only had to use the axle side of the kit to get my angle dialed in. Quality, laser cut and precision bent piece. Buy with confidence. Works great on my 80.
FJ80 stuff
my wife and I got an FZJ80 a few months ago, so naturally I've got some stuff in the works for this platform: PCK (for 50-150mm lifts) RAM. (Radius Arm Mou
eimkeith.com
Last edited:
I'm considering these 60/62 stock wheels for my 40.
Does any one have one more?
Be glad if you can use them. If it helps with getting them to you I may be able to have the old tires dismounted also.
More joy found on the cruiser, looks like previous owner took the cruiser into salt water above the axles, and now the wheel bearings have some rust on them.
Anyone have a spare timken or koyo bearing set for both sides of a 97 LX450 rear axle? Would like to pick up in the 919 area on the 26th or so. Napa is being inconsistent on the pickup dates
Anyone have a spare timken or koyo bearing set for both sides of a 97 LX450 rear axle? Would like to pick up in the 919 area on the 26th or so. Napa is being inconsistent on the pickup dates
Last time I checked you can get Timken from vatozone
80 series third row, drivers sideLX570 third row, and 5 LX570 20" rims and tires. Also have a cast iron claw foot tub. Best offers on all this shi....stuff
