Official 37" and up picture thread (4 Viewers)

[Wermz]

*drooling

 

[TexasJack]

finally got to test out the new 3 link on 40s

View attachment 2432865

View attachment 2432866

View attachment 2432867

How much trimming did 40's require? Got any photo to detail the scope of fitting 40's?

 

[malteserunner]

6 x 37's...

 

[Oscar Witte]

How much trimming did 40's require? Got any photo to detail the scope of fitting 40's?

Not much, don't have pictures but it was the lip of the front and rear of the rear wheel well to make it flush with the lining for about 6 inches from the bottom edge. The front I stretched forward and cut the front clip out in about 12" and up about 4".

 

[Bambusiero]

@Oscar Witte what is that big bolt in front middle of your axle?

 

[GOTLOCKED96]

@Oscar Witte what is that big bolt in front middle of your axle?
View attachment 2433115

looks like a limiting strap

 

[Oscar Witte]

@Oscar Witte what is that big bolt in front middle of your axle?
View attachment 2433115

Center limiting strap. I got the strap from a surplus store than welded on a giant bolt to make it work lol

 

[J2P]

37x12.5/17 J-lift, HDJ manual and 4.11
Think 37 mach the 80's good, but still think about om some bigger fender flares and drive on wider rims. .. View attachment 2195818

Hi is that a Slee bumper with a factory Aisin winch?

 

[tVille80]

Finally get to contribute to this thread
Just picked up some used BFG K02s 37x12.5R17 and FJ Cruiser Steelies
1994 FZJ80
OME Heavy 3” lift (850J / 863J)
Stock Gears
No spacers
Haven‘t taken it off-road yet, so I am sure other mods will be required

I’m still using the acorn style lugs from my stock wheels which I am not sure is correct. Need to research this more.

 

[highsierra4x4]

who is running a 3.75 inch back spacing? did you need spacers for rubbing?

 

[GOTLOCKED96]

Finally get to contribute to this thread
Just picked up some used BFG K02s and FJ Cruiser Steelies
1994 FZJ80
OME Heavy 3” lift (850J / 863J)
Stock Gears
No spacers
Haven‘t taken it off-road yet, so I am sure other mods will be required

I’m still using the acorn style lugs from my stock wheels which I am not sure is correct. Need to research this more.

View attachment 2467849

View attachment 2467850

what size are your tires?

 

[tVille80]

what size are your tires?

Oops, forgot the most important part.
37x12.5R17

updated original post also

 

[bryson]

Finally get to contribute to this thread
Just picked up some used BFG K02s 37x12.5R17 and FJ Cruiser Steelies
1994 FZJ80
OME Heavy 3” lift (850J / 863J)
Stock Gears
No spacers
Haven‘t taken it off-road yet, so I am sure other mods will be required

I’m still using the acorn style lugs from my stock wheels which I am not sure is correct. Need to research this more.

View attachment 2467849

View attachment 2467850

Acorn lug nuts on those steel wheels should be correct.

Nice backdrop for the photos!

 

[TexasJack]

Finally get to contribute to this thread
Just picked up some used BFG K02s 37x12.5R17 and FJ Cruiser Steelies
1994 FZJ80
OME Heavy 3” lift (850J / 863J)
Stock Gears
No spacers
Haven‘t taken it off-road yet, so I am sure other mods will be required

I’m still using the acorn style lugs from my stock wheels which I am not sure is correct. Need to research this more.

View attachment 2467849

View attachment 2467850

Get sliders sooner than later. You only have to bend the rocker panel once by coming down hard on a rock and the doors will never seal right again.

 

[BlueCruiser84]

Here’s a recent picture of mine. Dobinson’s 4” springs, 17x9” wheels, scooted the front axle forward an inch, and 37s.

 

[OffRoadScott]

When I upgrade to 37s I am thinking of going with a 17x9 with either 3.5" or a 4.5" with a 37x13.5x17. Does anyone have any experience running either a 17x9 3.5" backspacing or 4.5" backspacing with a 37x13.5 tire?

 

[COYS]

When I upgrade to 37s I am thinking of going with a 17x9 with either 3.5" or a 4.5" with a 37x13.5x17. Does anyone have any experience running either a 17x9 3.5" backspacing or 4.5" backspacing with a 37x13.5 tire?

yall should really start using offsets instead.

I like where your head is at wanting wide 13.5s. Iirc box rocket runs 37x13.5s.

 

[Oscar Witte]

When I upgrade to 37s I am thinking of going with a 17x9 with either 3.5" or a 4.5" with a 37x13.5x17. Does anyone have any experience running either a 17x9 3.5" backspacing or 4.5" backspacing with a 37x13.5 tire?

I would go with the 3.5

 

[Box Rocket]

37 x 7.
Untitled by Adam Tolman, on Flickr

 

[Corbet]

37 x 7.

I’ll swap you fire wood & tent locations.
my extra 2 might be over 37?