Holy hell, there is hardly anything left on that front end!
Got my new Trepadors/Method beadlocks installed finally. They balanced easily and they ride nice and quiet. Glad I switched to Trepadors!
Official 37" and up picture thread (8 Viewers)
- Thread starter slow91fj90
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Holy hell, there is hardly anything left on that front end!
Got my new Trepadors/Method beadlocks installed finally. They balanced easily and they ride nice and quiet. Glad I switched to Trepadors!
hello . wondering what lift kit size you useHoly hell, there is hardly anything left on that front end!
Got my new Trepadors/Method beadlocks installed finally. They balanced easily and they ride nice and quiet. Glad I switched to Trepadors!
nukegoat
Should have bought a Jeep
I heard the trepador radials were not even remotely similar in performance to the bias... not bad, just way less extreme off road and way more geared to daily driving. Let us know how they performHoly hell, there is hardly anything left on that front end!
Got my new Trepadors/Method beadlocks installed finally. They balanced easily and they ride nice and quiet. Glad I switched to Trepadors!
I will.
Honestly I was looking at going with a 37" K02. With the wheeling we do nowadays I didn't need a super aggressive tire. Ended up buying a set of Rockers since I got them during the sale but they didn't get here but a week ago. The price was too good to pass up and was just going to put up with daily driving such an aggressive tire. But I lost 2 tires in a month and couldn't wait any longer.
JR Transmission said:
4" Slee kit along with their radius arms.
Found them on AutoAnything. Had a sale going on a while back so they were only $269/each. No tax, free shipping as well.
They are 17x8.5 with 4.75" backspace.
nukegoat
Should have bought a Jeep
You lost 2 pitbulls?
Reading it again it does look like I meant I lost 2 Pit Bulls
Had KM2s on there before and lost 2 of those in a short time span. Front right had a cut on the sidewall from my last wheeling trip. It gave out and so I was running around on the spare. It was used when I got it 4 years ago and has just been hanging off the back of the Cruiser. It didn't last very long before it delaminated.
Had KM2s on there before and lost 2 of those in a short time span. Front right had a cut on the sidewall from my last wheeling trip. It gave out and so I was running around on the spare. It was used when I got it 4 years ago and has just been hanging off the back of the Cruiser. It didn't last very long before it delaminated.
what bs are those wheels ... doing something like it . thanks
cool thank you ... thats a very nice setup ... i think slee is where im going to ... At least there in the u.s
malteserunner
Dr Evil
They are 2.75" bs.
thank you sir ......
KILLER STANCE !!!!!View attachment 1258759
Here is mine on 37"
Year: 1996
Shocks:KING 2.5 res and other additions
Springs: OME comp 4" front and 5" rear
Bodylift:NONE
Trimming:NONE
Bumpstops:YES HYDRALIC
Wheels
Spacers: 1.5" spacer in the rear and none in the front
Tires:toyo mt 37x12.50r17
Castor: MAF 3" brackets
Gears: 5.29 Nitro gears
Lockers: TJM air locker front
Detroit lockers rear
Are you running any wheel spacers ?Don't think I've posted in the official thread, so my humble contribution...
Yes 1.5" front & back.
Hello is that a 1250 or a 1350Don't think I've posted in the official thread, so my humble contribution...
Nice looking rims. What brand?
1994 80 Series on 6 inch slee lift. 37 x 12.5 x 17 New KM2's
Using the truck in the 36 hour of uwharrie endurance race in August.
Which are preferred?
17x9 -38mm/3.5” BS 6x5.5 - will these stuff into the wheel wells?
17x8.5 +0/4.5” BS 6x5.5 - Going with this one!
Could some show or explain the difference? Thank you!
Using the truck in the 36 hour of uwharrie endurance race in August.
Which are preferred?
17x9 -38mm/3.5” BS 6x5.5 - will these stuff into the wheel wells?
17x8.5 +0/4.5” BS 6x5.5 - Going with this one!
Could some show or explain the difference? Thank you!
Last edited:
fourtrax
SILVER Star
I think a 9 inch rim with -38mm = 3.5" backspace
I think a 8.5 inch rim with -6mm offset = 4.5" backspace (with zero offset the backspacing would be ~4.25")
that being the case it should like something like this?
Rim & Tire Size Calculator. Custom Offsets
but, i haven't stated at a holiday inn express recently if ever.
I think a 8.5 inch rim with -6mm offset = 4.5" backspace (with zero offset the backspacing would be ~4.25")
that being the case it should like something like this?
Rim & Tire Size Calculator. Custom Offsets
but, i haven't stated at a holiday inn express recently if ever.
-OEM wheels plus 1” wheel spacer
- Front Dobinson 3” tapered coils plus 1” spacer.
-Rear Slee 4” HD progressive coils
-bump stops dropped 2.5”
-minor fender trimming at the rear lower area of all 4 wheel wells.
-No rubbing but very close
These photos were taken while loaded down during our recent three week adventure.
