Need felpro/amazon part number for axle flange seals

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 11, 2019
Threads
34
Messages
503
Location
Sacramento
Hello, need to have some gaskets here and can’t wait for toyota ones. I want to tighten/check all my bearings before going to SAS. Does anyone have a fel pro part number for the gaskets? Would need front and rear for FJZ80. Thanks
 
Hello, need to have some gaskets here and can’t wait for toyota ones. I want to tighten/check all my bearings before going to SAS. Does anyone have a fel pro part number for the gaskets? Would need front and rear for FJZ80. Thanks
Take the Toyota # and put it in Google search, it will most likely come back with available sources, including Amazon ( I try not to use them if at all possible)
For future reference I use Cruiser outfitters
They have super fast shipping usually Same or next day.
FWTW those gaskets are in expensive and I buy them half a dozen at a time and keep them in the drawer. Just for times like this.
 
Take the Toyota # and put it in Google search, it will most likely come back with available sources, including Amazon ( I try not to use them if at all possible)
For future reference I use Cruiser outfitters
They have super fast shipping usually Same or next day.
FWTW those gaskets are in expensive and I buy them half a dozen at a time and keep them in the drawer. Just for times like this.
Yeah I’ve tried that, got some amazon suggestions but the reviews said they fit Dana 60’s
 
Yeah I’ve tried that, got some amazon suggestions but the reviews said they fit Dana 60’s
It’s Saturday don’t know how you will get Fel-Pro any faster call Cruiser outfitters
 
Where are you located?

We have 1000+ in stock but can't ship til Monday. When are you leaving?
 
Don’t over think it !!
Jack up each wheel garb 12&6 o’clock and check if they’re loose.
If there not loose your good to go!!
 
I will ever bring my spares to SAS just in case.
My guess is Kurt can have some to you by Tuesday afternoon.
But if you’re opening that can of worms you better get all the gaskets and seals associated with the axles.
When was the last time you were in there.
If condition is unknow a full front axle rebuild kit would be the way to go.
The rear axle is pretty bulletproof.
 
I will ever bring my spares to SAS just in case.
My guess is Kurt can have some to you by Tuesday afternoon.
But if you’re opening that can of worms you better get all the gaskets and seals associated with the axles.
When was the last time you were in there.
If condition is unknow a full front axle rebuild kit would be the way to go.
The rear axle is pretty bulletproof.
Yeah it’s a 2500 mile trip so I wanted to check everything, and be ready in case I have the pull the flanges off. I think I will just RTV or make my own gasket if I have to.

Did full rebuild of front axle 2-3 years ago and rear axle about a year ago.
 
In that case if there not loose don’t mess with them.
JMHO
 
Yeah it’s a 2500 mile trip so I wanted to check everything, and be ready in case I have the pull the flanges off. I think I will just RTV or make my own gasket if I have to.

Did full rebuild of front axle 2-3 years ago and rear axle about a year ago.
Why can't you just reuse the gaskets that are on there. If you're careful, they won't tear, and if they do, it's not critical.
 
Have you tried your local dealer?? The likely won't have them in stock but
should be able to get them the next day before noon.
 
I use "The Right Stuff" in black to glue my flanges back on when I have a trail or "emergency" repair.

I keep a can of this in my truck.

The Right Stuff Black
 
My local dealer, McGeorge, keeps them in stock, I am sure yours will too. Very common gasket.
 

Users who are viewing this thread

Back
Top Bottom