Does anyone know the part number for the lower lip on a 2021 lx570 sport? Circled in the picture below. I need a new grill on my 2017 LX and would prefer to change it out to the sport look. I would buy both the grill and the lower lip, but can't seem to find a part number for the lower lip.
good day
I consult someone with more knowledge.
I have to buy the cylinder head for the Toyota 1HZ my truck HZJ70-0001242 and I have 3 part codes
11101-17011 11101-17012 11101-17050
They are compatible with each other because in my truck's manual it would be the first one but I can only...
Hoping someone can point me to a part number for a 16x8 oem steel wheel.
Photo below on a 105 but I believe the wheel is a 70 series part. Any help is appreciated!
Does anyone know what the part number is for a replacement key fob for a 2008 200 with a production date of 10/2007?
I found two different oem options:
89904-60200
Or
89904-60420
I plan to replace the transmission fluid and filter. I'm coming up with two part numbers for the filter: 35330-60060 and 35330-60070. There is a $15 price difference between the two. Any idea which one is correct? I have a 2015 LX 570.
Also, can the pan gasket be reused or does it need to be...
Anyone have a part number for what I'm guessing is called the drip rail molding? The molding that sits in the roof channel on both sides under the rack feet.
Thanks,
Jim
Hello everyone,
I didn't see anything in the FAQ about this, but does anyone know the part number for the A/C resistor? My first 2 low settings work as well as the Hi, but my #3 setting doesn't work. This is for the 1992 model year.
Any help would be much appreciated!
Thank you
I’m seeing two versions listed, but I don’t know which I need. Mine is the one in the left diagram, 88310A, without the viscous heater. 1998 JDM HDJ101. Is it 99364-31240 or is it 99364-31720? I can’t find which is which. Thanks.
Tried to take my roof rack off my 2000 Cruiser to clean the channels and a bunch of the hardware is rusted.
Anyone know the part number for replacement bolts? Or can you recommend what you substituted from the local hardware store?
I found a possible part number but not sure if it is the...
I looked over and over on PartsOuq but couldn't find this bolt.
I need one of the bolts that mount seats to the body. I believe it's M8x1.25, but I prefer original. What is PN for it?
Hi All,
I recently bought a 2008 GX470 and starting to update some of the hoses. Can anyone tell me what the hoses at the front of the manifold are? Looking for a part# for the right side (starting to crack). I promise I tried to search for the answer before I posted. I borrowed the picture...
I ended up the the 97 HZJ 75 camper that was posted here recently. Needs some panel replacements, trying to track down an image of the below part numbers.
Any help is appreciated, I was able to get a top panel from the place in NH and a window frame from Dubai.
Yesterday I managed to mangle the right bracket that holds the bottom of the bumper
bracket
This was from this link: bumper removal.
Does anyone have this bracket laying around or know its part number?
Thanks
Does anyone know the name and/or part number of this part? It's located on the firewall on the passenger side. The truck is in Belize and the guy working on it called it the evaporator valve, but I don't think that's what it is. I haven't been anything on the parts diagrams that look like it.
Newb LC owner here - This is a "trail fix" from a PO and before I pull it, I would like to have the replacement part on hand. Apparently it was bulging a bit. I don't have a shop manual yet. This is on the front of the engine, Drivers side -
I mangled a few of the spring hanger bushings getting them out. I have a 10/72 truck. Best I can tell it has 25mm hangers. I see OMESB20 listed as front and rear hanger bushings but the listings are not very descriptive. Can someone please confirm this is the part I need and how many I get...
I'm not sure of the actual name of the part. It is the rubber bumpers on the front corners that support the hood when it is closed. Picture with highlighted area below. I was wondering why the hood was tilted when closed. It turns out 1 bumper is gone and the other is pushing through the frame.