Builds Meet Steve

[PabloCruise]

with the 3;70s, 4 spd, 33s, and tired motor, could only get to 65mph. top speed not really a goal for me, but getting up hills at more than 35 is

At sea level?
That sounds like a very tired engine, or something else wrong with it...

 

[PabloCruise]

so some dumb ass has created 2 threads for Steve, Meet Steve, and Steve the new pig build!. from now on I will trytfo not post under Meet Steve, but refer you to Steve the new pig build. I know , im confused also. but now know why I cant find certain posts-Thanks Half Wacked

You can ask the Mods to merge the threads

 

[Pigeaten]

At sea level?
That sounds like a very tired engine, or something else wrong with it...

Carb way out of adjustment, hope that will help

 

[PabloCruise]

Carb way out of adjustment, hope that will help

I feel you Brother!
Dealing with those bad carb Blues on my 40.
Just pulled the carb for rebuild.

 

[Pigeaten]

I feel you Brother!
Dealing with those bad carb Blues on my 40.
Just pulled the carb for rebuild.

not sure, had carb rebuilt, but i think Valley Hybrid di not adjust after mounting, as all this is coming out soon. I will give it a whirl

 

[Pigeaten]

so LED light discussions made my head spin, so went back with all stock, cleaned lenses and replaced bulbs, looking at truck, noticed a little rust around cargo window. ADD kicks in , I cut rubber and remove gaskets, pull windows, pig surprise!
as i considered how to proceed, i thought, need to accomplish something, pull the driver door and replace hinges, more rust. If i am going to make pig party, im going to have to spit on rust, and leave for another day. since i have cargo windows out, will need to address holes

 

[WarDamnEagle]

Those $50 upgraded Toyota headlights that come with the harness are pretty good. PO put them on my pig before I bought it. Don't have the part number handy but will dig it up if you want to consider. I think someone else already mentioned them in this thread, IIRC.

 

[samc2447]

Toyota headlight and harness kit 81110-60P70

 

[PabloCruise]

so LED light discussions made my head spin, so went back with all stock, cleaned lenses and replaced bulbs, looking at truck, noticed a little rust around cargo window. ADD kicks in , I cut rubber and remove gaskets, pull windows, pig surprise!
as i considered how to proceed, i thought, need to accomplish something, pull the driver door and replace hinges, more rust. If i am going to make pig party, im going to have to spit on rust, and leave for another day. since i have cargo windows out, will need to address holes

View attachment 2638797

View attachment 2638799

View attachment 2638800

View attachment 2638802

I think pretty much any discussion involving LED/HID is going to generate a lot of responses!

What is your plan for new cargo window rubber?

 

[Pigeaten]

Patch the holes, clean rust and seal , new cargo seals(been buying rubber last 5 years), hopefully get headliner in first, but time clicking away before pig party

 

[Pigeaten]

Rust deeper than I thought, what can I dump/spray, in areas to stop or slow down rust? I have some rust converter, internal frame coating , and some POR 15. I have gotten the biggest part of rust off where I have access . But put my finger in hole where sun visor goes, rust, I wish I could dunk truck in something to stop. Thoughts or ideas?

 

[wngrog]

Smoke it with rust converter and Fluid Film. Fluid film creeps where paint amd rust converter can’t.

 

[PabloCruise]

This ^^^
Final step is to get a bag of Flamin Hot Cheetos and crush into a fine powder, then apply over the Fluid Film.

 

[Pigeaten]

This ^^^
Final step is to get a bag of Flamin Hot Cheetos and crush into a fine powder, then apply over the Fluid Film.

It looks like that now with mouse pee rust
I hope this pig can swim, going to be floating in fluidfilm soon

 

[Pigeaten]

Crunchy or the air puffed?

 

[sneaky]

I was going to suggest unbolting the roof support ribs and cleaning in there, but it looks like yours are welded in?

 

[WarDamnEagle]

Get a gallon of corroseal. I think I would skip the fluid film, etc. if you are going to paint. If not then definitely use it.

 

[Pigeaten]

So if Im going to paint use which product?

 

[elroberds]

So if Im going to paint use which product?

 

[bobm]

So if Im going to paint use which product?

Buddy it's up to you!!! Just so you know I think Steve is Cool