If it looks like this I'd......

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

....and your spring took the beating...
img165.webp
 
if your steering is kinda jerky you might want to check this
birf1.jpg
 
If you're flywheel looks like this, you should probably replace it:

SANY0271.jpg


And on the previous rig.....the windshield glass is good, and you could tear down & media blast the axles, and they would be good as new....:)
 
problems

If you find this underneath, and main bearings that look like this and you find something like this in your pan, well, You know...
HB first look.webp
Mainbearings.webp
Metal frags.webp
 
PO Craftsmanship

If the previous owners of your LC had craftsmanship like these you should seriously think about doing something about it...
Bad Craftsmanship.webp
PTO thing.webp
 
If it looks like this.

FJ40CustomSprings_007.sized.jpg


FJ40CustomSprings_013.sized.jpg


Then Autocad doesn't work for getting the perfect length of your new custom springs for a 4" lift and 45 degree shackle angle........ :mad:
 
If you are backing up and turn the wheels in 4 lo you might hear a BANG!!!!! You might find this......

Bustedstuff.jpg
 
This is not the appropriate method for correcting the shackle angle.
Body Damage 78FJ40 07.webp
 
if these guys try to get into your cruiser(or cooler)...........................you may want to lock the door.
PA060028.webp
 
If your chromoly axles look like this - you might want to ....
snapped-axle-3.webp
 
Last edited:
If it looks like this.... you might not need that new cam...
Badshaft1c.webp
 
If your tow hook looks like its giving you the finger...then you might want to get a better one.
Benthook.jpg

unrated tow hook that was on my cruiser when I got it:rolleyes:
 

Users who are viewing this thread

Back
Top Bottom