Gamiviti 200 series products & solutions
- Thread starter nakman
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Installation looks good! Question for you, my yak attack comes only with the self tapping screws. What size of nuts n bolt do you use to secure it down?
On a different topic: roof rack wind noise, which bolt hole setting on the front towers did you ended up using to move the fairing closer to the roofline? Mine set at the middle holes.
Thanks,
On a different topic: roof rack wind noise, which bolt hole setting on the front towers did you ended up using to move the fairing closer to the roofline? Mine set at the middle holes.
Thanks,
CharlieS
GOLD Star
@FloodHopper I tossed the screws that came with it and picked up some black oxide internal hex bolts and locknuts from the local hardware store. I grabbed some stainless steel washers from an assortment I have in the garage. Sorry, I don't recall the size. I just brought the yaktrak mount thing to the store with me and grabbed some that fit in the holes. They ended up being too long and I had to cut them down with a dremel.
I set the front towers on the second hole up from the bottom and the rear posts on the top hole. That gave me 1/4" gap all the way across the fairing.
I set the front towers on the second hole up from the bottom and the rear posts on the top hole. That gave me 1/4" gap all the way across the fairing.
Last edited:
#10 × 1/2" shown here.
Should probably go 3/4"
Should probably go 3/4"
If that gonna be textured kind of to match the dash. That's why I had suggested a raptor liner.
Yes. My thought was this wouldn’t be as thick and may not affect the fit.
Thank you
- Joined
- Jul 30, 2003
- Threads
- 72
- Messages
- 2,935
- Location
- Broomfield, Colorado
- Website
- www.gamiviti.com
- Thread starter
- #172
they're on order, and will arrive next week. So I'll be shipping out any back orders the week of 5/2, when I am back from Cruise Moab. I am really sorry & embarrassed by how this has gone, did not expect to be completely yanked around by a vendor like this particularly since things were going well with them.. . but alas, we find new solutions and move foward and that's what we're doing here. I really appreciate everyone's patience here!
- Joined
- Jul 30, 2003
- Threads
- 72
- Messages
- 2,935
- Location
- Broomfield, Colorado
- Website
- www.gamiviti.com
- Thread starter
- #174
that's awesome, thanks! yeah you get lots of tumbs up when driving that setup... 
- Joined
- Jul 30, 2003
- Threads
- 72
- Messages
- 2,935
- Location
- Broomfield, Colorado
- Website
- www.gamiviti.com
- Thread starter
- #176
@CSteppe82 that looks great, what did you paint it with? Looking forward to seeing what you do with the accesssory mount.
Also FYI the new 16+ versions of the dash accessory mount are in stock again, and all the backorders shipped today. In fact there should be no back orders for either Land Cruiser version now, all are shipped with more on hand of each version.. so if you were waiting for me to let you know, well here we are @greynolds @Tex68w @TOMSRYD
Also FYI the new 16+ versions of the dash accessory mount are in stock again, and all the backorders shipped today. In fact there should be no back orders for either Land Cruiser version now, all are shipped with more on hand of each version.. so if you were waiting for me to let you know, well here we are @greynolds @Tex68w @TOMSRYD
- Joined
- Jul 30, 2003
- Threads
- 72
- Messages
- 2,935
- Location
- Broomfield, Colorado
- Website
- www.gamiviti.com
- Thread starter
- #178
@CSteppe82 did you ever mount your fire extinguisher? just curious how that is working... also I sold out on my first small run of those 3rd row brackets, but have more on order- getting a few done in aluminum which I should have next week, and then more steel ones which are 3-4 weeks away. Considering switching to aluminum though on this one, am excited to see the first samples- one of the reasons being the lead time from this supplier is less than half of the steel fab guys. Last week I finally put up a web page for this product, and made a video, so will put a link here, thanks again all for the interest and support getting this one going:
www.gamiviti.com
As for the dashboard accessory mounts, we've got 3 out of 4 designs knocked out now. Is there still interest in the early model 2008-2015 lexus 570?
200 accessory mounts — Gamiviti
www.gamiviti.com
As for the dashboard accessory mounts, we've got 3 out of 4 designs knocked out now. Is there still interest in the early model 2008-2015 lexus 570?
greynolds
SILVER Star
I think I recall that someone ordered a replacement speaker grill (the part that dashboard accessory mount attaches to) so that it would be easy to swap back to the factory setup if desired. I just spent a bit of time looking in the online parts catalogs, but am not sure if I have found the correct part. Does anyone have the part name and/or number available (my LC is a 2020 HE).
teejnut
SILVER Star
I'm still interested for my 2013 LX570.@CSteppe82 did you ever mount your fire extinguisher? just curious how that is working... also I sold out on my first small run of those 3rd row brackets, but have more on order- getting a few done in aluminum which I should have next week, and then more steel ones which are 3-4 weeks away. Considering switching to aluminum though on this one, am excited to see the first samples- one of the reasons being the lead time from this supplier is less than half of the steel fab guys. Last week I finally put up a web page for this product, and made a video, so will put a link here, thanks again all for the interest and support getting this one going:
200 accessory mounts — Gamiviti
As for the dashboard accessory mounts, we've got 3 out of 4 designs knocked out now. Is there still interest in the early model 2008-2015 lexus 570?
