- Thread starter
- #761
When you gonna post Britts pics?
Thanks Bob.
When he downloads and send to me. Really have no idea when that'll be.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
When you gonna post Britts pics?
Thanks Bob.
hhhhmmmmm, i've got 6 tailgates here (although one has undercoating still on most of it and i may have not peeled it from the correct section) that suggest otherwise, i haven't looked inside twrecks tailgateIf you look on the inner fender well up by the vent or inside on any doors or tailgate you will see a little brushed on swatch of original color.
Thanks Bob.
hhhhmmmmm, i've got 6 tailgates here (although one has undercoating still on most of it and i may have not peeled it from the correct section) that suggest otherwise, i haven't looked inside twrecks tailgate
The only color I've found is rust. Haha.
Get this. The 72 gate has mustard in it, yet it's not mustard in original form.
Just an odd swipe, that's nonsensical in location. in the color the entire interior and exterior was once, but the inner gate was white with what looks like oversprayed shot of mustard.
Delancy, any part on the PIG with the exception of the tub should have that swatch of paint. That's how they knew the color during final assembly. Its in every door, tailgate and inner fender on my PIG.
Thanks Bob.![]()
Delancy, any part on the PIG with the exception of the tub should have that swatch of paint. That's how they knew the color during final assembly. Its in every door, tailgate and inner fender on my PIG.
Thanks Bob.![]()
Come on now. lets see some OEM goodies!
As much as or more than the chrome windshield/glass surrounds I'm now bent on having.
Have a clunk and a squeak that I can't locate and it's pissing me off.
I had a similar squeak issue on my 80, ended up being the poly bushings on the OME shocks ... you couldn't get the nut tight enough on the stud under the brake master. Replaced the poly bushings with OEM rubber, torqued the heck out of it using a strap wrench on the shock body and long extension with a wobble on my impact wrench. I also had a clunk at another time, check your sway bar bushings
Tucker
Are they poly ... not saying they aren't good, saying you can't compress them enough on the DS under the brake master that they don't squeakThe shock bushings are new from Radflo, which have proven to be high quality on the FJC.