- Joined
- Apr 4, 2006
- Threads
- 162
- Messages
- 4,044
- Location
- Hillsboro, OR
- Website
- www.cascadecruisers.com
well... not to further hi-jack this thread but Big Blue is back home now.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
well... not to further hi-jack this thread but Big Blue is back home now.
Nice, I could not find the double seal. So I used 2 of the other ones (very common apparently)
BTW, that is a hell of a intermediate shaft retainer. Mine is a piece of 1.5" flat stock..
You suprised?? lolmace.... this guy is kicking your ass.
so I decided to call Jerry Nichols [/SIZE]
IMHO put your Transcooler out front and low, your a/c condensor next, your Intercooler after that and finally the radiator. I would run a pair of electric fans, one on and one thermostatically controlled for those hot days or hard work. If one doesn't fit, take out the trans cooler and get an inline cooler such as this: http://store.summitracing.com/partdetail.asp?autofilter=1&part=MOR-41200&N=700+115&autoview=sku or this: http://store.summitracing.com/partdetail.asp?autofilter=1&part=PRM-1003&N=700+115&autoview=sku or this might even fit somewhere: http://store.summitracing.com/partdetail.asp?autofilter=1&part=EAR-41610ERL&N=700+115&autoview=sku I have had good luck with those in tight swaps. Nice project. Keep it up. Congrats on the new family addition.
On mine, my toggle is on-off-on - the top position is thermo controlled.. middle is stream crossing, and bottom is manual on. Be sure to put a light on the dash that goes on when you shut the fans off. (Terminal 87a is good for that)