double seal housing

[fcgadget]

Tried to find a source for the double seal housing at the parking brake .

Mudrak is at least temporarily not online.

Any ideas for another source? And approximate cost?

I don't want to try 'making it myself', I'm not a metalworker...

 

[Cruiserdrew]

Try Georg at Valley Hybrids. I believe I got mine from him with the Orion.

 

[MOTOV8R]

@orangefj45 do you have these? I need one too.

 

[snaggletto]

Poser used to have them. I got mine from him a couple years ago. Send him a PM, he will help you out.

 

[3_puppies]

any local machine shop can modify yours.

 

[fcgadget]

what's a ballpark cost on these?

 

[White Stripe]

A speedi sleeve works really well for me. I have no leaks at all after installing one.

 

[middlecalf]

@wngrog I think he had one made recently

 

[wngrog]

Yeah. Mudrak has done two for me. The speedi sleeve works great in some places but never there.

I sent mine to him and got it back in 2 weeks. $110

 

[65swb45]

I have 10 in stock. $60 exchange. Mark’s Off Road PN 090-88AS

 

[pjohnson]

There's a diy thread on here somewhere...

Found this one:
Another double seal speedo housing

It can be done by hand with a die grinder.

 

[mdsims]

I have 10 in stock. $60 exchange. Mark’s Off Road PN 090-88AS

Can’t really beat that.

 

[sproggy]

What exactly are we talking about here? This is the seal you need to stop the gear oil from leaking out from the shaft into the parking brake and dirtying up the shoes?

 

[mdsims]

What exactly are we talking about here? This is the seal you need to stop the gear oil from leaking out from the shaft into the parking brake and dirtying up the shoes?

Yes, but the housing is bored out double the normal depth to accommodate two seals stacked in there.

 

[sproggy]

Well I have that leak, sure. To repair it am I going to need to go down this road, too (just replacing the seal per the manual is not going to cut it)? How is it Toyota manufactured this to such crummy spec?