CruiserCult 40 Series Product offerings

[Cruiser Cult]

Transfercase range selector grommet prototype rolled in. Rubber material is great! Its tough, chemical and UV tolerant. Based on the pics @65swb45 sent, I modified the base geometry a bit and the second version is shipping this week. This initial prototype has a rough finish but the final pieces will be smooth.

@65swb45 I'll send you a final version as a thank you for the helpful picture!

 

[Cruiser Cult]

Second iteration rolled in. Overall super happy... except they forgot to smooth the exterior. Annoying but minor issue on a small test batch. Got it mounted it up and found a couple small issues in regards to ease of mounting. Tweaked the geometry to aid in a smoother installation and I think this baby is done. Going to put in an order for an initial release batch. Will update again soon.

Also we are going to be making the headlight dimmer switch boots in this fashion as well.

 

[MatthewMcD]

Second iteration rolled in. Overall super happy... except they forgot to smooth the exterior. Annoying but minor issue on a small test batch. Got it mounted it up and found a couple small issues in regards to ease of mounting. Tweaked the geometry to aid in a smoother installation and I think this baby is done. Going to put in an order for an initial release batch. Will update again soon.
View attachment 3881966
Also we are going to be making the headlight dimmer switch boots in this fashion as well.

How about the little 10mm-ish boots on the back of the cluster? I can see a lot of applications for this stuff.

 

[Cruiser Cult]

Cool ad from 1966 we just scanned and uploaded. The backside of the sheet has a neat advertisement from Con-Ferr.

 

[numby]

Cool ad from 1965 we just scanned and uploaded. The backside of the sheet has a neat advertisement from Con-Ferr.

The ad shows a 55 station wagon. I thought they weren't released here until late '67 or thereabouts?

 

[red66toy]

The ad shows a 55 station wagon. I thought they weren't released here until late '67 or thereabouts?

Good eye!! I glossed over the little 55 at the bottom and paid too much attention to the penciled in 1965 date on the magazine page. I bet it’s a year off at least. I assumed it was advertising a model year ahead with the post 65 40. I’ll edit the page.

 

[Cruiser Cult]

Up today is a great brochure from 1961 Toyota Japan! Great photos inside and some wild offerings.....

Cool new FJ45LV with some bleed over 20 series parts on it.

And another thing I need.... Sky Parking. hahaha

 

[autobon7]

Up today is a great brochure from 1961 Toyota Japan! Great photos inside and some wild offerings.....
View attachment 3890808
Cool new FJ45LV with some bleed over 20 series parts on it.
View attachment 3890810
And another thing I need.... Sky Parking. hahaha
View attachment 3890811

Want that Toyota Steel Garage

 

[MatthewMcD]

Want that Toyota Steel Garage

It rusted out after the first rain.

 

[Cruiser Cult]

Final iteration arrived. I think it looks great. Super happy with form and function at this point. It's a bit awkward to lean into the engine bay and mount, but a little lube and getting it warm before mounting worked perfect. Rubber is chemical and heat tolerant. So should be up to the task of these old engine bays.
We have 4 available now, but will have a larger restock soon.

 

[Cruiser Cult]

Here is a fun one for the LV folks especially. Cool road test review from 1964. Lots of fun and great info on the beloved wagon. Freshly scanned and uploaded

 

[Cruiser Cult]

Restocked our F/2F/3F antitheft harnesses! Thanks to those who have been waiting patiently for these.

Land Cruiser Anti-Theft Harness

Restock on our best sellers. We are excited to offer a high-quality kill switch / anti theft harness for people that run various Toyota engines! These kits use the highest quality Japanese parts: A switch, a mount for the switch, terminals and a full set of easy to follow instructions. Comes...

cruiser-cult.myshopify.com

 

[Cruiser Cult]

Early 40 steering column bushings restocked. These pair well with our replacement horn plates. Do it right or do it twice they say.

early-1972 FJ40 inner steering column bushing

Want to help tighten up that side to side end play in your pre-1972 FJ40 steering wheel? Probably about time to replace that ancient plastic bushing/bearing at the end of the steering column! The Cruiser Cult is proud to offer this long NLA part. Give it a good coat of grease on install and...

cruiser-cult.myshopify.com

FJ40 Steering Column Rubber Bushing

This Cruiser Cult reproduction part finally lets pre-1972 FJ40 owners replace the old dry-rotted and torn main rubber bushing at the ends of your steering columns. You will need to reuse the steel sleeve from your old bushing and the horn contact wire/cap. Carefully dig those parts out. Use a...

cruiser-cult.myshopify.com

63-72 FJ40 FJ45 horn contact ring and brush

More on the way! Chances are your horn contact seat, brush and isolator are rusted and broken at this point in history! We are very pleased to offer a reproduction FJ40 FJ45 Land Cruiser horn contact "seat" , brush and rubber isolator! We designed and made these in house with pride. These are...

cruiser-cult.myshopify.com

 

[Cruiser Cult]

Early 40 steering column bushings restocked. These pair well with our replacement horn plates. Do it right or do it twice they say.

FJ40 Steering Column Rubber Bushing

This Cruiser Cult reproduction part finally lets pre-1972 FJ40 owners replace the old dry-rotted and torn main rubber bushing at the ends of your steering columns. You will need to reuse the steel sleeve from your old bushing and the horn contact wire/cap. Carefully dig those parts out. Use a...

cruiser-cult.myshopify.com

63-72 FJ40 FJ45 horn contact ring and brush

More on the way! Chances are your horn contact seat, brush and isolator are rusted and broken at this point in history! We are very pleased to offer a reproduction FJ40 FJ45 Land Cruiser horn contact "seat" , brush and rubber isolator! We designed and made these in house with pride. These are...

cruiser-cult.myshopify.com

View attachment 3918049

 

[brian]

We have tail light protector cones back in stock! Modeled off the OG plastic units. Unfortunately we had a computer issue and lost our original design file so we had to remodel it from scratch and then learn how to print them correctly on our new machine. Took a bit of trial and error but we finally got a product we can be proud of again. You can swoop on a set HERE.
Thank you all for the support!
View attachment 3562528

 

[Cruiser Cult]

View attachment 3918070

Looks great. Thanks for sharing!

 

[Pighead]

Thanks for reminding me. I used my fuel pump rebuild kit the other day so now I have another old fuel pump to rebuild so I ordered another one. That is an excellent rebuild kit.

 

[Cruiser Cult]

Thanks for reminding me. I used my fuel pump rebuild kit the other day so now I have another old fuel pump to rebuild so I ordered another one. That is an excellent rebuild kit.

View attachment 3918723

Cheers! Thank you for the support and glad another pump is getting a new lease on life.

 

[Cruiser Cult]

Just restocked these little gems.

Koito body reflectors

New Koito body reflectors for your 1960s FJ40! We have red for the rear (sides and back). We also have amber reflectors that are perfect for use on 1968/69 FJ40s. The amber ones can be dissected and the reflector can be inserted into the now NLA OEM mount found on the late 60s fender aprons...

cruiser-cult.myshopify.com

 

[Cruiser Cult]

Prime Day Sale!

We’ve got you covered!

Cruiser Hat

Let me introduce you to your next favorite hat. We made these up in a soft cotton twill, unstructured and sweat felt patch. They have a flat bill and snap back closure. These are comfortable and the perfect daily driver.

cruiser-cult.myshopify.com

Get that bald spot covered for you or your friend .