NeverGiveUpYota
Dare me.
How bout just unscrewing the screw and flip it around? Do you have spares? Try it and see if it would suffice.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
You mean without taking hose off. Just sort of take the clamp apart and see if I can separate it and squeeze it of/on there? Thought had crossed my mind. I tried to take one apart and it seems like it distorts to the point of not being able to provide proper even clamp pressure after putting it back on but I am not sure on that.How bout just unscrewing the screw and flip it around? Do you have spares? Try it and see if it would suffice.
What was on there as stock was a band w/ the funny twist shaft that sits opposite to the ones you have on right? So a vastly different type of clamp altogether that was also much more slim lined inthat area, right?
Not necessarily NLA but we don’t have the tools they had at the factory to put them on. I wouldn’t think. Someone like @beno could clarify.
Pretty sure I have both of mine at those points w/ cheap worm gears and w/ the head flipped around and then positioned 180 degrees opposite yours. I don’t have a photo now and not at home but quite sure I didn’t have the tightening part below the pipe. Is there a reason your keeping them situated low?
Yeah I def have worm gear ones and mine are flipped around (at least the lower one) is so I tightened it from behind.
What was on there as stock was a band w/ the funny twist shaft that sits opposite to the ones you have on right? So a vastly different type of clamp altogether that was also much more slim lined inthat area, right?
There should not be any harm in have one clamp type on one side and a different one on the other right?
Idk man, it might be too tight on one side.Shouldn't be a problem unless you're going to a concourse. Or it leaks! Proofs in the pudding!
I’ve found over time I have tried to stop seeking a bunch of opinions because we are all so different and in the process of learning we figure out what is best all on our own.