Builds Benjamin’s 3D Prints Build (121 Viewers)

[BenCC]

I am having trouble setting up the first thread. I set it up as a table of content. The problem is that the number of images reaches the limit (20 images per post).

I talked to the forum staff member. The limit cannot be lifted. Is there a way I can post more than 20 images, such as linking to external images?

 

[BenCC]

Going to relocate the Hazard/DiffLock switches to the ashtray.

 

[WingNutLG]

How did this work for you? Trying to figure out exactly how i want to set everything up with all the options BenCC provides, and I like this one.

Finally installing this weekend, will report back!

 

[gregnash]

I am having trouble setting up the first thread. I set it up as a table of content. The problem is that the number of images reaches the limit (20 images per post).

I talked to the forum staff member. The limit cannot be lifted. Is there a way I can post more than 20 images, such as linking to external images?

Create a reference document that you can edit and update. Post images of each page and link to that full document itself. That way you are not linking a single image for each single make.

 

[BenCC]

Another thing I am making. It is an insert in the center storage box.

 

[Johnny pin]

Another thing I am making. It is an insert in the center storage box.

View attachment 2354040

Finally ! Been waiting for someone to make this

 

[Hugh Heifer]

I'm looking forward to getting rid of the butterfly dealio. I don't like how it works in general, and how it still doesn't keep the cups restrained very well. Some of that would be improved by your deeper holders, but the butterfly still pops out when lifting a cup out, or gets lifted up/out by a Nalgene bottle trying to tilt.

Can I assume there is not room for two Nalgene-sized bottles in there? (since you did one large and one smaller)

My butterfly is missing and they are sort of expensive. I am hoping for just a deeper holder or one that I can drop an old school foam koozy in to take up the extra room.

 

[BenCC]

Noted. I am also planning to have a “solid” version without the need of the butterfly.

My butterfly is missing and they are sort of expensive. I am hoping for just a deeper holder or one that I can drop an old school foam koozy in to take up the extra room.

 

[BenCC]

Finally ! Been waiting for someone to make this

Planning to make it with soft rubbery material.

 

[Johnny pin]

Planning to make it with soft rubbery material.

And this will work with the oem armrest with flipdown cup holders ?

 

[BenCC]

And this will work with the oem armrest with flipdown cup holders ?

I have no idea for now. But I get one shipped to me. Should be here in a few days.

 

[Otter]

I have no idea for now. But I get one shipped to me. Should be here in a few days.

I hope it will work. I'd love the organizer, but I'm probably one of the few people that actually use the flip down cupholders. It's great when my wife and I want coffee and our water bottles

 

[BenCC]

I hope it will work. I'd love the organizer, but I'm probably one of the few people that actually use the flip down cupholders. It's great when my wife and I want coffee and our water bottles

Wondering how deep is the storage space when the flip down cupholders are folded

 

[Otter]

Wondering how deep is the storage space when the flip down cupholders are folded

I don't think it impacts the depth at all. I believe it rests on top.

 

[BenCC]

I don't think it impacts the depth at all. I believe it rests on top.

Great

 

[Mangocruiser]

Going to relocate the Hazard/DiffLock switches to the ashtray.

View attachment 2353221

If you’re interested in chasing up new connectors for the PCB connection lead it is a Molex CONN RCPT HOUSING 2MM 7POS SGL part number 51004-0700
Data sheet https://www.onlinecomponents.com/datasheet/510040700-11869134/
The pins are Molex CONN SOCKET 24-30AWG CRIMP TIN Part No 0500118000

 

[Mangocruiser]

Going to relocate the Hazard/DiffLock switches to the ashtray.

View attachment 2353221

And now you have me rethinking my whole right side - left side swap with the ashtray panel possibility.............

 

[BenCC]

If you’re interested in chasing up new connectors for the PCB connection lead it is a Molex CONN RCPT HOUSING 2MM 7POS SGL part number 51004-0700
Data sheet https://www.onlinecomponents.com/datasheet/510040700-11869134/
The pins are Molex CONN SOCKET 24-30AWG CRIMP TIN Part No 0500118000

Thanks a lot. I was scratching my head on how to extend the cable.

And now you have me rethinking my whole right side - left side swap with the ashtray panel possibility.............

@Ayune is experimenting another way to solve the problem. Our goal is to release the hazard/diflock panel.

 

[Hugh Heifer]

I did not even recall I had a door over my cup holder until the posts and then looking for it this morning.

 

[Blake100]

I did not even recall I had a door over my cup holder until the posts and then looking for it this morning.

I’ve had my 100 since 2013 and discovered the flip down cup holders on accident when installing my Wit’s End organizer a couple weeks back.

Thought I broke something when drilling it in because it fell down like it was coming apart. Nope, just 2 very convenient cup holders that would have come in handy over the last 7 years!

Me yelling to my wife - “Honey, come out here! You’re not going to believe this!”