rkymtnflyfisher
Trout Bum
- Thread starter
- #4,001
Anyone know who makes that plug that goes in the hole in the fuel tank cover? The hole for the sending unit.
Builds An Accidental Frame Off.................. (5 Viewers)
- Thread starter rkymtnflyfisher
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Toyota Matt…. Some 16ga and 3 or 4 M5 rivnuts would do the trick.
rkymtnflyfisher
Trout Bum
- Thread starter
- #4,003
I thought someone was repopping that rubber cover that went there. Was it Toyota Matt? I'll have to browse his goods.
He’s got it on his website- it might take awhile.
RevISK
SILVER Star
Maybe not. Word is he’s pretty focused on his shop while not being on mud.
rkymtnflyfisher
Trout Bum
- Thread starter
- #4,006
3rd time was a charm.
It was HOT though, mid 90's, dry as a furnace fan in Phoenix Arizona.
The dry fly action was hot too.
It was HOT though, mid 90's, dry as a furnace fan in Phoenix Arizona.
The dry fly action was hot too.
FloridaLife
SILVER Star
I miss being able to go trout fishing! That one looks like he's trying to bite that circle on your forearm. LOL
rkymtnflyfisher
Trout Bum
- Thread starter
- #4,008
That circle must have been from my reel, at least that's all I can think of.
1911
chupacabra
Yeah, that’s what the skinwalkers always say …
thatcabledude
GOLD Star
I assumed you were playing with the truck’s cigarette lighter again.
rkymtnflyfisher
Trout Bum
- Thread starter
- #4,011
More to come......
rkymtnflyfisher
Trout Bum
- Thread starter
- #4,012
Friday night tacos and tequila are on the slate for a few.
rkymtnflyfisher
Trout Bum
- Thread starter
- #4,013
I've been wanting to do something with the radio slot in my dash for a long time now, with the new seats that included heaters in them it gave me a good excuse.
The switches included with the seats are dumb in my opinion, yeah, they're cheap, and that gets passed along to the consumer. Nevertheless, I don't like them.
The switches included with the seats are dumb in my opinion, yeah, they're cheap, and that gets passed along to the consumer. Nevertheless, I don't like them.
rkymtnflyfisher
Trout Bum
- Thread starter
- #4,014
After countless hours of browsing 40 tech here in mud, I found some pics of a 6 gang rocker switch panel from somewhere. I started a thread about it and received some solid input.
Along came some stuff from Waytek and OTRATTW switch place.
Along came some stuff from Waytek and OTRATTW switch place.
rkymtnflyfisher
Trout Bum
- Thread starter
- #4,015
More to come later...
The fun began when I wanted lighted switches. I had already decided on the V series rockers from Carling.
The seat heater wiring design runs the 12vDC power supply to a magic black box under the seat, from there a 3.5(ish)vDC switching circuit goes up to the switch. Hi-off-lo switching circuitry (SPDT).
That wouldn't work with a 12vDC light in the Carling switch, after reviewing some wiring diagrams on their switches I figured out i could run with a DPDT (double pole double throw) switch would work. Using one set of contacts for the heater switching, and the other I brought 12vDC to power the lighting circuit in the switch.
The fun began when I wanted lighted switches. I had already decided on the V series rockers from Carling.
The seat heater wiring design runs the 12vDC power supply to a magic black box under the seat, from there a 3.5(ish)vDC switching circuit goes up to the switch. Hi-off-lo switching circuitry (SPDT).
That wouldn't work with a 12vDC light in the Carling switch, after reviewing some wiring diagrams on their switches I figured out i could run with a DPDT (double pole double throw) switch would work. Using one set of contacts for the heater switching, and the other I brought 12vDC to power the lighting circuit in the switch.
Last edited:
rkymtnflyfisher
Trout Bum
- Thread starter
- #4,016
I found a wiring connector kit on Amazon that mated up with the existing connector bodies from the heater harness.
Female Sta-Kons from Waytek.
Klein tools from my trade life.
Heat shrink tubing from my existing parts stash to help clean up each switch harness.
Female Sta-Kons from Waytek.
Klein tools from my trade life.
Heat shrink tubing from my existing parts stash to help clean up each switch harness.
Ditcherman
SILVER Star
I used 60 series seat heater switches in my 40 to power the BMW seats. Works great.
1911
chupacabra
The "Foot Lights" switch will be perfect for your underglow and spinning hubcap lights!
