1995 FZJ80
Sorry if this has been posted or talked about before, but no matter how much I have searched, I can't find anything about it.
We bought this 80 series at our shop, and after inspecting everything, we found out that the previous owner had removed the CDL and ABS bulbs out of the dash. After installing them, we found that the CDL locker was broken. Thought that would solve the issue, but no. Upon further investigation, the center diff would still not lock, even though the actuator was working. After pulling the T-case out and apart, the shaft fork was not even attached to the sleeve. Finally, everything is together, the truck goes into 4lo and the center diff locks as it should, and everything seems happy, except, I am still getting the ABS and CDL light on the dash, no matter what position the actuator is in, and I have swapped the sensors on the T-case with known good ones, still the same issue. Changed out the relay for the center diff, no luck, and also tried a known good ABS computer, but still no luck. I have been tracing wires to check for shorts, or any issues with no luck yet.
At this point I just feel like I need some insight from you cruiser heads. I feel like I'm chasing my tail and not making any progress. Any suggestions or insights would be greatly helpful.
Thanks all
Sorry if this has been posted or talked about before, but no matter how much I have searched, I can't find anything about it.
We bought this 80 series at our shop, and after inspecting everything, we found out that the previous owner had removed the CDL and ABS bulbs out of the dash. After installing them, we found that the CDL locker was broken. Thought that would solve the issue, but no. Upon further investigation, the center diff would still not lock, even though the actuator was working. After pulling the T-case out and apart, the shaft fork was not even attached to the sleeve. Finally, everything is together, the truck goes into 4lo and the center diff locks as it should, and everything seems happy, except, I am still getting the ABS and CDL light on the dash, no matter what position the actuator is in, and I have swapped the sensors on the T-case with known good ones, still the same issue. Changed out the relay for the center diff, no luck, and also tried a known good ABS computer, but still no luck. I have been tracing wires to check for shorts, or any issues with no luck yet.
At this point I just feel like I need some insight from you cruiser heads. I feel like I'm chasing my tail and not making any progress. Any suggestions or insights would be greatly helpful.
Thanks all