6X series Unobtainium (1 Viewer)

[CruiserTrash]

As long as you play it on a factory cassette deck. Here's mine, from my HJ60. I wish I had taken a photo of it when I removed it a while back, but there is a factory diagram on the top of the cassette deck on how to connect to the radio. There is a harness that plugs into the back of each to connect them.

Oh - and notice the crack-free heater bezel. Another unobtainium...
View attachment 3208928

Unfortunately I don't have the original cassette deck. I found an AM/FM/Cassette/CD unit out of a 2000 Camry at the junkyard that's doesn't look out of place in my 1982 60. The CD provision is for a trunk mounted CD changer - there's no CD slot on the head unit, only cassette - and I hacked BlueTooth into that. It's all hidden under the dash so you don't see it. I need to scrape off the label and have one made that says "BT". Also: it says Toyota on it and the backlight is green so it matches fairly well.

 

[dbbowen]

Oh - and notice the crack-free heater bezel.
View attachment 3208928

This is definitely obtanium, a simple email to @ChaserFJ60 fixes that heater bezel problem with a solution that will probably outlast the entire truck

 

[sved]

Parts Catalog,

Paper version off the EPC . only 6# series 80-87

And acrylic 60 series round headlight protectors .

 

[Cruiser Cult]

Parts Catalog,

Paper version off the EPC . only 6# series 80-87

View attachment 3209087

And acrylic 60 series round headlight protectors .

View attachment 3209094

Awesome! I hadn't seen a non-lined version of those headlight protectors before.

 

[sved]

Older VHS tape from the Dutch Toyota importer including landcruiser challenger ( 90 series)

 

[Samppahj]

Oh my god, I want that Country Cruisin' tape so bad. I have a cassette deck in my 60, so it's just a matter of tracking one down. I'm sure it will be easy haha.

It is not easy. For the last 6 years I have collected those, this is the only one I have found. All the others you see now and then for sale.

We need audio for all of these now! Fantastic collection!

I can try to make a playlist in youtube

 

[ChaserFJ60]

This is definitely obtanium, a simple email to @ChaserFJ60 fixes that heater bezel problem with a solution that will probably outlast the entire truck

FJ60 Interior Dash Bezel

55412-90A02-05 55412-90A01-13 55412-90A01-03 This replacement bezel's goal is to be a no compromise, exact replacement panel for the FJ60 Toyota LHD or RHD Land Cruiser surround Instrument panel FJ60 FJ60 dash bezel AC trim panel interior Gray tan grey 3D printed new surround

cruiserhead.com

I ran over one with my FJ60 and its still usable. These are much stronger than OEM lol

 

[kirvesmies]

FJ60 Interior Dash Bezel

55412-90A02-05 55412-90A01-13 55412-90A01-03 This replacement bezel's goal is to be a no compromise, exact replacement panel for the FJ60 Toyota LHD or RHD Land Cruiser surround Instrument panel FJ60 FJ60 dash bezel AC trim panel interior Gray tan grey 3D printed new surround

cruiserhead.com

I ran over one with my FJ60 and its still usable. These are much stronger than OEM lol

so was it intentional destructive testing, or an "oh f*&k, what did i just run over?" but a win either way obviously

 

[HemiAlex]

Not as exciting as everyone else’s, but it’s something.

 

[cps432]

Not as exciting as everyone else’s, but it’s something.

View attachment 3209384

View attachment 3209385

You and my dad have the rest of those things

 

[Cruiser Cult]

Not as exciting as everyone else’s, but it’s something.

View attachment 3209384

View attachment 3209385

Oh those definitely quality as just as exciting.

 

[ChaserFJ60]

so was it intentional destructive testing, or an "oh f*&k, what did i just run over?" but a win either way obviously

It was intentional. I was messing around with my quality control unit and decided why not. I had already thrown it at the ground and up in the air a few times with only a few dings. There was a small crack after I ran it over but you could never tell haha

 

[kirvesmies]

It was intentional. I was messing around with my quality control unit and decided why not. I had already thrown it at the ground and up in the air a few times with only a few dings. There was a small crack after I ran it over but you could never tell haha

i can see the marketing scheme now, 'crash tested n damn near indestructible'. good on you man

 

[ToyotaMatt]

FJ60 2F Timing Gear matching meshed service set kit 13523-60030 & 13521-60010

these actually fit a post Siamese F1.5 FJ40 all the way to a 9/87 2F FJ60 , that's a pretty incredible application life span of a internal engine part ….

 

[HemiAlex]

Those look familiar.

 

[ToyotaMatt]

Those look familiar.

are 3F Carb timing gears and these 2F ones some how interchangeable Alex ?

 

[HemiAlex]

No idea, but you did sell me a set of these NOS matched gears last year or so ago.

 

[ToyotaMatt]

No idea, but you did sell me a set of these NOS matched gears last year or so ago.

really ?

dam , that means im down to 9 NOS sets now ....

 

[Samppahj]

FJ60 2F Timing Gear matching meshed service set kit 13523-60030 & 13521-60010

these actually fit a post Siamese F1.5 FJ40 all the way to a 9/87 2F FJ60 , that's a pretty incredible application life span of a internal engine part ….



View attachment 3209878View attachment 3209879


View attachment 3209877



View attachment 3209880View attachment 3209881

I don´t know why but I somehow love these old style cardboard boxes. It is always a struggle to throw them away and many times they are left hanging around on some shelf.

 

[Cruiser Cult]

I don´t know why but I somehow love these old style cardboard boxes. It is always a struggle to throw them away and many times they are left hanging around on some shelf.

Totally! The old packaging is so cool. All the variations over the years. Like you, I also struggle to toss them. They are fun to keep around as long as it doesn't hamper the space for new parts. hahaha