Hi how do I get one these kits? Thank you
Scroll back to post #1 in this thread, click on the links provided.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hi how do I get one these kits? Thank you
Hi how do I get one these kits? Thank you
@cruiseroutfit Kurt any chance of you doing something similar for GX470 owners? or has anyone fitted this to the 470?
(We officially have the s***tiest rear door of all Toyota/Lexus 4WD's)
Hi Kurt!
Does this kit also work on the 18+ with the auto hatch?
Thanks,
Joseph
Still taking orders? 15 LC in sandstone. Thx
@cruiseroutfit or others: I can't find the full instructions, but it appears some splicing of the factory loom is required. Could connectors be added to this kit to eliminate any splicing?
We've got an Air Down Gear Up customer interested in this and I'm trying to figure out how much labor time to estimate them and what connectors I might want to have on hand ahead of time if I were to attempt to eliminate any factory harness cutting.
This is a great solution. I was surprised when our 200 customer mentioned the lack of an interior switch. I envisioned something exactly like that and was glad to see someone else already cobbled together all the parts/templates. Nice work!
Thanks. We did the install without any patch harness, but I was able to avoid cutting the illumination wires by releasing the terminals and using an open barrel butt splice to crimp the neck onto the kit wire and then used a new 090 II terminal on the end of the kit wire.Assuming those connectors could be found in both a male/female version it could be done. We did spend some time searching and inquiring with our OE style connector supplier and they were not able to match anything up. Hope that helps!
Thanks. We did the install without any patch harness, but I was able to avoid cutting the illumination wires by releasing the terminals and using an open barrel butt splice to crimp the neck onto the kit wire and then used a new 090 II terminal on the end of the kit wire.
The switch wires are a bear. Tiny gauge and not much space to work with the crimper.
I'm still searching for the connectors. They're out there. If I can find info I'll share here. One end of the illumination one is available from Toyota so one down.
View attachment 2717562
View attachment 2717563
Kurt-
Any update on the GX option?
Asking for a friend....