1FZ Charcoal Canister found?!?

[USMCDocJ]

Digging for a charcoal canister for my 3FE online and trying to cross reference this part number for some used ones that I found only to find the apparently there's a Toyota dealership that still has some FZJ80 charcoal canisters.

As I don't have FZJ80 I did not verify stock but they are showing in stock on the website and have a price. Link is below. Hopefully this helps somebody out.

This doesn't happen to fit a 3FE as well does it?

77740-60310 - Vapor Canister 1993-1994 Toyota Land Cruiser | Ourisman Toyota Parts

Save Money On Your Vapor Canister (7774060310) For Your 1993-1994 Toyota Land Cruiser When You Shop With Ourisman Toyota Parts!

toyotaparts.mcgeorgetoyota.com

 

[OGBeno]

It’s not available; hasn’t been available in eons.

Regarding its interchangeability: sure you can make a charcoal canister from another vehicle to work. You’ll need dimensions and then compare against what you have in your FJ80.

They all operate basically the same from that era of automotive technology.

 

[USMCDocJ]

It’s not available; hasn’t been available in eons.

Regarding its interchangeability: sure you can make a charcoal canister from another vehicle to work. You’ll need dimensions and then compare against what you have in your FJ80.

They all operate basically the same from that era of automotive technology.

Right on. I was hoping maybe some random dealership found some old new stock.

Thanks for the info.

 

[thebfg]

This happens a lot with discontinued parts. The Toyota dealers won't update the status until you place an order. Then they'll realize it's discontinued, cancel your order and update the site. In the past, I've "shotgun" ordered the same part from multiple dealers in hopes one actually has it in stock. But now, if one shows it as discontinued, I'll just go to Partsouq, Megazip or Amayama since they have better "real-time" inventory.

 

[leonard_nemoy]

Digging for a charcoal canister for my 3FE online and trying to cross reference this part number for some used ones that I found only to find the apparently there's a Toyota dealership that still has some FZJ80 charcoal canisters.

As I don't have FZJ80 I did not verify stock but they are showing in stock on the website and have a price. Link is below. Hopefully this helps somebody out.

This doesn't happen to fit a 3FE as well does it?

77740-60310 - Vapor Canister 1993-1994 Toyota Land Cruiser | Ourisman Toyota Parts

Save Money On Your Vapor Canister (7774060310) For Your 1993-1994 Toyota Land Cruiser When You Shop With Ourisman Toyota Parts!

toyotaparts.mcgeorgetoyota.com

I was successfully able to rebuild the charcoal canister in my 91. It was super easy.

On my 97 the charcoal canister rebuild didn't work. The check valve was clogged and I couldn't get it cleaned out.

I would definitely recommend rebuilding your charcoal canister.

Charcoal canister rebuild - 80 Series

80 Series Charcoal Canister rebuild. Bench grinder removes the seal cleanly. Wrap up is clean the valves, replace the old charcoal, button it up and reseal. You can weld it closed or use a good epoxy like JB weld. I will finish mine up later today with a little rattle can paint. The problem was...

forum.ih8mud.com

Here is one thread on the subject. I am sure you can find others if you search.

 

[USMCDocJ]

I was successfully able to rebuild the charcoal canister in my 91. It was super easy.

On my 97 the charcoal canister rebuild didn't work. The check valve was clogged and I couldn't get it cleaned out.

I would definitely recommend rebuilding your charcoal canister.

Charcoal canister rebuild - 80 Series

80 Series Charcoal Canister rebuild. Bench grinder removes the seal cleanly. Wrap up is clean the valves, replace the old charcoal, button it up and reseal. You can weld it closed or use a good epoxy like JB weld. I will finish mine up later today with a little rattle can paint. The problem was...

forum.ih8mud.com

Here is one thread on the subject. I am sure you can find others if you search.

Right on. Thank you for the link!

 

[jaymar]

I was successfully able to rebuild the charcoal canister in my 91. It was super easy.

On my 97 the charcoal canister rebuild didn't work. The check valve was clogged and I couldn't get it cleaned out.

I would definitely recommend rebuilding your charcoal canister.

Charcoal canister rebuild - 80 Series

80 Series Charcoal Canister rebuild. Bench grinder removes the seal cleanly. Wrap up is clean the valves, replace the old charcoal, button it up and reseal. You can weld it closed or use a good epoxy like JB weld. I will finish mine up later today with a little rattle can paint. The problem was...

forum.ih8mud.com

Here is one thread on the subject. I am sure you can find others if you search.

I think @LandCruiserPhil did a thread on this too. There's also a commonly-used plastic replacement with its own thread somewhere...

 

[effjay80]

Duralast VC120 or AC Delco SLP-1 215-153 both fit without the bottom retaining bracket and work perfectly.

 

[MickeyB]

This happens a lot with discontinued parts. The Toyota dealers won't update the status until you place an order. Then they'll realize it's discontinued, cancel your order and update the site. In the past, I've "shotgun" ordered the same part from multiple dealers in hopes one actually has it in stock. But now, if one shows it as discontinued, I'll just go to Partsouq, Megazip or Amayama since they have better "real-time" inventory.

Partsoq has been amazing and I’m still trying to understand how I gets parts from them wayyy faster than in the US.

 

[BILT4ME]

I was successfully able to rebuild the charcoal canister in my 91. It was super easy.

On my 97 the charcoal canister rebuild didn't work. The check valve was clogged and I couldn't get it cleaned out.

I would definitely recommend rebuilding your charcoal canister.

Charcoal canister rebuild - 80 Series

80 Series Charcoal Canister rebuild. Bench grinder removes the seal cleanly. Wrap up is clean the valves, replace the old charcoal, button it up and reseal. You can weld it closed or use a good epoxy like JB weld. I will finish mine up later today with a little rattle can paint. The problem was...

forum.ih8mud.com

Here is one thread on the subject. I am sure you can find others if you search.

Where is the check valve on this?

 

[leonard_nemoy]

@BILT4ME

If I remember correctly it's built into the hose nipple on the top of the canister.

On my 91 I was able to spray some brake cleaner through it and it worked fine. On the 97 I couldn't get it to work.

 

[SNLC]

A 105-seeies charcoal canister works.

Cheers

 

[Hornd]

Remove it and install a Gas Filter for $3. I know the Environment and Vapors, but you bought a Cruiser and your DD is a Prius.

 

[ajax1]

A 105-seeies charcoal canister works.

Cheers

W hat I did

 

[Racefiend]

I'll have one available when my swap is complete if you want. The truck passed CA smog with it.

 

[nomad80]

A 105-seeies charcoal canister works.

Cheers

Might be a dumb question, but where can you order a vapor canister for a 105 series? The parts websites I regularly use don’t parse a 105 series. They just specify parts by model year of the vehicle, such as 1998, which defaults to a 100 series.

I have a 1995 80 series, and would like a vapor canister for a 105 series as a replacement. Thanks in advance.

 

[BILT4ME]

Have you tried www.partsouq.com to find a part number or order from?

Might be a dumb question, but where can you order a vapor canister for a 105 series? The parts websites I regularly use don’t parse a 105 series. They just specify parts by model year of the vehicle, such as 1998, which defaults to a 100 series.

I have a 1995 80 series, and would like a vapor canister for a 105 series as a replacement. Thanks in advance.

 

[nomad80]

Have you tried www.partsouq.com to find a part number or order from?

That’s just it — I don’t have a part number, nor Vin number, to search with on the www.partsouq.com website. I don’t see a way to search for a part for a 105 series without a part number or Vin Number.

(Probably user error — me — on the partsouq website.)

 

[jaymar]

OEM Charcoal Canister Replacement

Well with the cruiser torn apart and waiting on several parts to finish up various projects. I decided to start one more project and follow up on a post from when I first bought the cruiser. Although not horribly bad I can tell the charcoal canister is clogged and intermittently causing to much...

forum.ih8mud.com

 

[nomad80]

OEM Charcoal Canister Replacement

Well with the cruiser torn apart and waiting on several parts to finish up various projects. I decided to start one more project and follow up on a post from when I first bought the cruiser. Although not horribly bad I can tell the charcoal canister is clogged and intermittently causing to much...

forum.ih8mud.com

Thanks, jaymar! I appreciate it.