I’m very lucky to have American gear right here in San Luis Obispo.
They’ve done a great job on my differentials
If I didn’t have them here local, I would send them to Kurt without thinking twice
Another resource is to ship your 3rd to Zuk. He freshened up my rear 3rd with ARB few years back. I wanted all new bearings, and new set of 4.56 R&P at the same time. The previous pinion bearing race spun on the pinion shaft so that made that...
Thanks to a member sending me a link to this thread!
The Window Rocket is my product.
I'll start by answering a few questions-
Austin didn't do anything sneaky in his video. He's a stand up dude and calls it like it is. I told him about the...
I drove a buddy’s 80 that has power seats a while back and thought it was the dumbest thing ever. Same with my daughter’s 3rd Gen. It takes about two seconds to move the seat in my 80.
I had a 4 Runner and the Manual Window was Buttery Smooth for Drivers Side. I really miss it in Winter compared to Cruiser.
The Manual Seat Slid was Perfect too. I miss it when the Cruiser Seat Whines and Refuses to move.
For Passenger and...
If you are Putting in New Seals try Sleeving the Shaft with the SKF Speedi Sleeve.
Have heard Good things.
https://forum.ih8mud.com/threads/speedi-sleeve.271196/#post-15635653
Working on various projects on the diesel 80 last evening, I noticed that I had something of a collection of Front Inner Axle Seals. Probably due to my ongoing front axle leak that refuses to die.
But I thought I'd take a few pics for anyone...
I am facing this Same Leak Myself on Drivers Side. - Greasy Mess on inside of Tire.
Just purchased a new seal from Dealership $18.99.
Had the Axle Shaft Groove Welded Up and Turned to original Size for $70.
Next will be a New Shaft for $110...
If you can answer these few Questions we can know if you Need to Change the Tees:
Do you have a Will in an Offsite Secure Location?
Do you have more than 1000$ cash on Hand for Emergencies?
Have you had a Full Body CT Scan?
Do you have Food...
Remove 1 and see the Condition instead of Guessing.
Put it back if Conforming, Replace both if Non Conforming.
Another Option is to Replace them with the Brass Tees used on the 80 Series.
**Try to Avoid the Replace Everything because it...
Gas Cans are Removed from Rack.
Gas is Siphoned into now Empty Truck Tank
Gas Cans are Put behind Tent to keep them out of Sight.
Rack is Removed to make Swinging Door Cargo Accessible.
Picture of Super Siphon - 5/8" Tubing - They work Great...
To take that further, people can try inflating the spare to the max pressure for that tire. It's super-easy to run it down to road pressure if you need to install it.
This buys more time before the spare pressure gets below a usable level from...
I always drop mine and Spray Up Under the Tire Carrier.
If your Truck has the 3/8 Square Iron then a Ratchet Wrench with a Few Long Extensions will work.
BIG torque can be Applied if you Adapted the 3/8" up to 1/2" Ratchet.
Busted mine Loose...
Here is a tool that is better for the garage than the OEM one for $26:
https://www.amazon.com/dp/B007TME6SO?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
You only need to shorten the side pins a bit with a grinder, Dremel, etc.
Works a lot...
Keep in Mind a Fridge gets Very Heavy when Loaded.
I wish mine was integrated into my Drawer Build Instead of On top.
Unsure what I will do when I'm 50 and have to Lift it Out. I'd Go Slider from Beginning and not on top of Drawers. Also...
I have ARB Element 63 qt. Wanted a dual zone as well, to run one zone as a freezer, but could not find one a couple of years ago when was looking for options. Got an ARB and run it at around 33-34 F. Raw meat stays cool for at least a week...
ARB (Nidec/Secop or Danfoss Compressor), Engel (Danfoss Compressor), or Dometic.
Add Solar (with Long Leads - Park Vehicle in Shade, Panels in Sun) and Solar Controller
Lithium Batteries are $$$. I run Lead Acid Deep Cycle Isolated from...