Here's some teaser pics of the tribute orange parts...
Builds 1966 FJ40 Frame-Off Build (3rd Generation Owner) (1 Viewer)
- Thread starter Jason Reed
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
1/2 the hardware arrived back from plating, it looks GREAT!
Amazingly, USPS located the other "lost" flat rate box and it also finally arrived at the plating location last week.
Amazingly, USPS located the other "lost" flat rate box and it also finally arrived at the plating location last week.
Awesome
Hey Jason. Just want to Thank you and Rock40 for a great re-build thread. It has become a go-to for me as I tackle my FJ-45 resto.
Can you post the name and any info on your plating guy. The stuff you've posted looks great. I'm running into a bit of a wall here in NJ as the platers are all bigger commercial operations and don't want to get into these smaller jobs. I'm exactly where you are at, nuts bolts and a box of parts ready to get plated.
Thanks in advance!!
Can you post the name and any info on your plating guy. The stuff you've posted looks great. I'm running into a bit of a wall here in NJ as the platers are all bigger commercial operations and don't want to get into these smaller jobs. I'm exactly where you are at, nuts bolts and a box of parts ready to get plated.
Thanks in advance!!
- Thread starter
- #227
@KFJ45. Hope all is well man. For the GOLD- zinc plating, contact below. Tell them I referred you (Jason Reed from PG&E who has the Toyota Landcruiser). I highly suggest shipping it in a wooden box (you can build cheap) and ship UPS. I had issues with the weight and shipping of the parts through USPS in a gorilla taped flat rate and @Rock40 and I began to stress big time. So, second time around we did the wooden box thing. And when I tell you this, I'm not kidding on their price. Dirt cheap and quality. $75 for an entire 5-gallon bucket full (85 lbs.) of hardware.
Ask for Steve- call ahead
Commercial Plating
1937 S. Cherry Ave.
Fresno CA 93721
Ask for Steve- call ahead
Commercial Plating
1937 S. Cherry Ave.
Fresno CA 93721
THANKS Jason! All great info and very much appreciated. Got a few more things to break down and put together the "Box of Parts". I agree on the UPS thing. Money well spent and I got a UPS store 5 minutes away.
Off to the garage to check out my latest care package from Roger/City Racer
Off to the garage to check out my latest care package from Roger/City Racer
Started re-assembly today...
Fitting the shackles will be next, now that I know which lengths go where.
Chased all the threads and put new studs in both the front/rear axle housings also. the Loctite will set up overnight and then the differentials will likely go back in tomorrow.
Chased all the threads and put new studs in both the front/rear axle housings also. the Loctite will set up overnight and then the differentials will likely go back in tomorrow.
Interesting, I think there's conflicting info out there, you are right though.
I know because I did it too. It'd be really noticeable once you got your fender mounted or tried to put the driveshaft back on.
Nice 
Got the front leaf spring orientation corrected yesterday, also installed the front and rear differentials
My real job is preventing me from working on this as much as I'd like. This morning, I was able to get both the driver and passenger side knuckles installed along with the knuckle seals.
Front spindles, backing plates, wheels cylinders and brake shoes are installed...
Subscribed! This is gorgeous and I'm very jealous!
