Question for all; What would throw off a 1-2 month old fresh alignment?
I noticed today the upper control arm nuts on my Freedom Offroad UCA's were loose, not hand loose, but loose enough that it didn't take much effort to tighten them up with a wrench a turn or two before they snugged up.
My rig is pulling to the left already, and it's frustrating because the ride quality seems to suffer and my vibration at 70-75 has returned.
Are a few good rut hits on the trails enough to throw off alignment if those nuts were loose?
Which I guess brings me to what I did today; I tightened my control arm nuts...
I noticed today the upper control arm nuts on my Freedom Offroad UCA's were loose, not hand loose, but loose enough that it didn't take much effort to tighten them up with a wrench a turn or two before they snugged up.
My rig is pulling to the left already, and it's frustrating because the ride quality seems to suffer and my vibration at 70-75 has returned.
Are a few good rut hits on the trails enough to throw off alignment if those nuts were loose?
Which I guess brings me to what I did today; I tightened my control arm nuts...