Not mine but wanted to share. Looks to be Pollux Orange. Mostly original except for the engine swap and Iron Man suspension.
$18,000
FJ40 | BJ40
Classifieds: Toyota 40-series Land Cruiser
Filter by prefix:
Posting the link for a friend of a friend whose husband passed away, he had a small car collection and this was one of them. Thought a TX mudder could at least check it out if anyone is interested.
https://www.vikinghiline.com/inventory/toyota/land-cruiser/353633/
1975 Toyota FJ40 - Arizona Truck - no rust. In excellent shape; all original sheetmetal and mechanically sound. No modifications; original engine and transmission. Extensive documentation; this is from Arizona and it is a US model. Included in the sale are a new headliner; seat covers and door cards - factory. The truck has 85 percent original paint; and a pleasure to drive. Please leave your number for a response. No disappointments; No Trades. Price is $34,000 no Trades. I have plenty of pictures. Tommyh204@yahoo.com
44452 Miles Currently showing, I originally purchased it in 2005. I drove it off and on for about a year , needed some brake work so I put it aside for a later day.
Too many trips in the 80 Series and a move to Omaha and I haven't done much with it since. It has been stored indoors since July 2008 . Life priorities change often , so its time to stop sitting on this an let someone else put it to use. $15,000. more images to follow....
Helping a friend sell his truck, please no disrespectful comments, or harassment .
I have no part in this build or say in price.
After speaking with him he would like to ask $60,000 obo ( I’m sure he would entertain reasonable offers )
Professionally restored from the ground up 1978 FJ 40
Mint condition
Less than 5k miles on the build (always garaged )
Not a single bolt on this build was left untouched , so much attention to detail
Turn key rig
Ramjet 350 motor has less than 6k miles
Port injection iron vortec 64cc heads
350@52000
400ft lbs @ 3500
Roller cam roller rockers
92 octane
Freshly rebuilt Advanced adapter NV4500 trans (5 speed )
Clear title
Warn winch 8274 8K
Air bags w air compressor
Stock t case , stock diffs
Rancho...
- Locked
It’s runs drives but no brakes expect ebrake has a lot of good parts wanting to sell whole at this time. No title $1550 obo
Pretty much what you see in the pictures. Post 1975 FJ40. Some rust in back, but overall the tub and body are in pretty good shape.
Some rust on hardtop sides. Very fixable.
Fiberglass cap is trashed. Hood is crap, full of bondo (not from this cruiser)
Drum brake front axle. Not sure why, but it is.
Great front section of the body, dash. A little rust on the transmission cover, but nothing on the floors.
Frame is pretty solid. Lots of grease, dirt, crust, but not damaged. Has some funky v8 mounts welded in. Otherwise unmolested frame.
Windshield frame is super nice. Cowl and dash are great.
I do not have a title unfortunately. I bought it to chop up into a trailer amd crawler project, but it's too nice a tub to destroy...
1977 FJ40 project for sale. $5,000
Purchased in Feb 2020. It was a wheeling rig for many years.
Clean NY title. Have the original VIN tag as well.
Frame has been sandblasted and powdercoated. New OME suspension. New brakes (drum rear, disc front) New body mounts from SOR included not installed yet.
Axles housings have been wire wheeled and undercoated. Wheels are in decent shape, tires are shot but hold air for roller purposes. Decent fiberglass tub, needs some body work. Comes with fiberglass fenders, bib and hood. No fiberglass top, doors or windshield frame. I have a steel windshield with good glass. Also have steel doors in rough shape and 2 steel hoods.
New painless wiring kit included. Have the original wiring...
1979 Toyota Fj40 for sale
Recently purchased the truck in June of ‘22 and really don’t want to sell it but I have to pay for flight school somehow. Been stored inside throughout my ownership. Barely touched it other than some brand new tires, just took it for the occasional drive on the weekends. Previous owner was an older gentleman that bought it off a used car lot in Denver 1981. He documented everything done to it very well. Full notebook of documents is pictured. Original truck other than being repainted at some point, the passenger door was replaced, and some OME suspension. It’s got some rust in the usual spots but overall really solid, frame is good and the tub is good. Have a bunch of spare parts to go with it. All emissions...
1979 Toyota Fj40 for sale
Recently purchased the truck in June of ‘22 and really don’t want to sell it but I have to pay for flight school somehow. Been stored inside throughout my ownership. Barely touched it other than some brand new tires, just took it for the occasional drive on the weekends. Previous owner was an older gentleman that bought it off a used car lot in Denver 1981. He documented everything done to it very well. Full notebook of documents is pictured. Original truck other than being repainted at some point, the passenger door was replaced, and some OME suspension. It’s got some rust in the usual spots but overall really solid, frame is good and the tub is good. Have a bunch of spare parts to go with it. All emissions...
Considering selling my fj40 om606 swap project, I started piecing this together while everything was shut for Covid and got all the main pieces together and then things got back to normal and I haven’t had time to finish it. It is a mix of a 70 and 68 fj40 body parts with a later 4 speed transmission and transfer case. I have an abundance of parts for the 40 itself. The engine is a 99 om606 that has a 603 mechanical pump as well as a 648 oil pump and oil pan to convert it to a rear sump. I do have a video of it running with the mechanical pump. It is mated up to the transmission using a speed gems adapter plate. I have at least 8k in the drivetrain alone and then around 6k in the rest of the parts. I figured I would throw it up and see...
Not mine. Looks like it could be a good deal depending on rust
1964 Toyota Land Cruiser project. Needs everything complete restoration but runs well on auxiliary fuel tank( I have the original fuel tank and passenger bench seat frame not shown in pics) and is in original complete condition. I have an extra front differential, factory tool kit, original wheels and hubcaps, later model FJ 40 roll bar, and Factory Toyota repair manual. Runs but does not drive will need to be towed or may be able to deliver for a fee. Clear CO title. Emissions test not required for 1964. Trades or partial trades considered for cars, trucks, ATV , snowmobiles,jet skis, or tractor but cash preferred
Not mine and no affiliation.
Perhaps some parts that are salvageable. Looks like they have the sides and roof as seen in one of the photos.
1979 toyota land cruiser for sale by owner - Redwood City, CA - craigslist - https://sfbay.craigslist.org/pen/cto/d/redwood-city-1979-toyota-landcruiser/7711091221.html
Iconic cruiser ready for adoption. Own a piece of history. You may have seen Rocky the 40 flying around the web or Cruise Moab. This is @cruiseroutfit 's first cruiser he built as a teenager with his Dad in 1995. She spent some time around Utah and a farm in Idaho. I acquired her from Jim of PortalTek Axles in SLC in 2010. I've put a lot of work into getting her running like a sewing machine and had some important drivable upgrades completed like Power Steering, Disc Brakes, updated wiring, Troll Hole Carb (rebuilt 2023), new fuel tank, etc. Rocky was my daily driver for years and she's been garaged the nearly 14 years we've owned her. She always passed emissions in Utah with flying colors. In Colorado 1968 is vintage and doesn't need...
1971 FJ40 Rusty but runs
Have all the parts and new quarter panels for the irreparable parts!
Not enough time to finish the project and need the space.
Sweet original PTO winch
Has a tow bar on the front bumper, bring a can of fix-a-flat and come and get it
Happy to send more picts…
$9500 Birmingham Alabama
1965 Toyota fj40 Land Cruiser project. Been sitting for years. Someone was in the process of putting a newer late 70's early 80's 4.2 motor in it that's not all the way completed. Motor has clean oil and turns over with the starter also has an hei distributor and a Weber carb.
Original motor is with it and is complete body has some rust in the outer sheet metal but floors and important stuff are solid. Ramsey pto winch is in nice shape, warn hubs, nice tailgate, windshield, frame, and grille. Would be a fun project for the right person or it has a lot of nice parts. Clear title
This was originally Tony's / Rockcods original "Sully" build. SOA 40 , disc brake conversion, You can probably still find his "Sully" build thread he did with his son. I picked it up from Tony and did a bunch more finishing off the interior -redoing seats , pulling roof and spraying in ceramic lizard skin and then an OEM headliner. The only rusty spot was the underseat toolbox/typical and i welded that up. (the ceramic keeps the calif.sun at bay and cool inside) While off i redid the roof exterior with a marine Gelcoat. (just like toyota originally did it) and found some steelies and 35s,37s. With the top off i welded up a full length family cage. I think the new 37s Toyos are on it currently but need to double check...
This one is available for bidding now at LelandLittle.com
VIN: FJ40-217409
With a 350 cubic inch Chevrolet V8 with an Edelbrock intake manifold, an Edelbrock carburetor with an electric choke, and an HEI distributor. Also with a four-speed manual transmission and a dual-range transfer case. It is equipped with a black bimini top, a front mounted WARN winch, a six-point roll bar, soft half-doors, aftermarket seats, 16″ beadlock wheels, manually locking front hubs, and aftermarket bumpers and step bars with a High-Lift jack and storage compartment. Under previous ownership work performed included a brake system overhaul as well as the installation of an aftermarket suspension lift. With front disc brakes and rear drums, and 33×12.5″...
Full nut and bolt restoration done on this truck. 2FE conversion. Will be getting more pics soon just wanted to get the ball rolling to see what interest is out there.
Asking $58k obo
I had a bad stroke and am now paralyzed on my right side. I am selling my FJ40 through Wilson Auctioneers in Arkansas. You can go to the attached link and see my Cruiser. Right now the high bid is 32,000. It also comes with a new Vintage Air A/C and the parts from Spector Off-road to convert the front to disc brakes. You can’t go wrong with this one. It’s in great shape. Contact Wilson Auctioneers directly with any questions.
https://wilsonauctioneers.bidwrangler.com/ui/auctions/112084/14315273
I have a 1962 FJ40 tub with a soft top and every part you will need for this truck aside from seats and a steering box. No rust, newly rebuilt engine, some parts pictured are just spare parts I have for all my trucks, not necessarily with this deal. Facebook listing is attached below as an outside link. Great starting point, all the part hunting has already been done for you!
$6,800
$
1977 FJ40
Chapel Hill, NC
Price $48,000
Mustard (repainted in 2015), 46k miles, excellent condition, NO RUST
I’m the 4th owner
Original 2F, 4 speed
Weber carb
Front disk brakes
Electric Power steering
OME 2” lift
33x10.50 MT on TRD wheels
plus extra set of steelies with 33x10.50 ATs
Retrosound BT radio
Original center console, front bumper, factory carb, interior roll bar pads are included
Work done since 2022:
4Plus bumper and 8274 winch
New real main seal, oil pan gasket and clutch
New heater control valve
New plugs, wires and dist cap
I purchased this beautiful FJ40 in Feb of 2022 with 42,000miles. I have thoroughly enjoyed owning and driving it but it's time to make room in the garage for new toys and adventures.
Hello! Hope everyone is doing amazing! I have a clean title 1971 Toyota FJ40 AWD Project. The truck ran and drove when parked about 2-3 years ago. It is rusty! The frame seems solid though. The wife wants it gone. Needs a new loving owner to come dig it out of my back yard! Super cool truck with the bench seats in the back. All glass is in tact. Needs lots of work and will be a good project for someone! I have no idea what to ask for the truck. I am open to any and all offers / any advice on how to price the truck. I will list on eBay as an auction if no one here wants it. Thanks!
Thread Filter
Latest posts
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Good independent shop for major service in Westchester County NY or CT area (9 Viewers)- Latest: Trapper50cal