Nice looking to do this same wheel...So, I assume you needed spacers...what size are they? Also mine me asking about what looks like a 4plus bumper? Did he also build the ladder? Mine didnt come with that option is all....thanks
Wheels that work, part numbers (1 Viewer)
- Thread starter Corbet
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The 309 for sure of the two. I have the same set up and run 285/70/17 stock FJ Cruiser wheels with 1.5" spacers. No rubbing. I do happen to have TLC calipers from a donor v8 swap a few years ...dont ya just love the v8? Gosh, now its my daily...having it rebuilt as we speak. Betsy Build if ya wanna follow....I’ve been following this thread and need help with wheel selection and tire sizing. I’d like to go with 17 inch wheels and Nitto Terra Grappler 285/75/17s (33.83” tall by 11.22” wide as advertised). These are the tires from my 74 bronco with really good tread left and I love how those ride (different story, but I’m going to 35x12.5 RTs on that truck). Right now on my 62 I have the original 15 inch wheels and 31’s. And around a 2.5” old man emu lift. the truck was already lifted when I bought if four years ago, but that was roughly the lift estimate in consulting w/ Georg and Tor who have both done work on it. So will this tire size fit without rubbing? And what do u guys think of these two wheel selections? (Links below). Also, these show 4.75” backspacing. I saw earlier in the thread that folks were talking about 3.5-3.75” BS, but can’t recall if that was on a 15” wheel. u guys thin these will work? And let me know if you think they don’t go with the look. I know it’s all personal opinion, but fire away.
309 | Grid | Titanium - Matte Black Lip
The 309 Grid Wheel features a clean 6 windowed spoke design with a debossed METHOD logo. The lip undercut simulates a true beadlock wheel and has replaceable lip bolts with optional colors available. It boasts a strong load rating of 2,500- 3,640 lbs.www.methodracewheels.com
and this wheel:
305 | NV | Titanium - Matte Black Lip
The Method MR305 NV Titanium features a simulated machined beadlock ring along with zinc-plated bolts. As with most Method Wheels, there is a matte clear coat along with push-through hub covers.
and picture of my rig so you can visualize.....thx
View attachment 2615428
Oh Sh&T I love'em sorry gotta copy! see Besty Build, Im going silver tho
Obviously these are in a box in my garage, unfortunately I'm thinking they may not fit at all? They are AEV Salta XR for and FJ60 think it's possible?
The center bore is my main concern they list it as 106.1 but it appears to start at 106.1 at the base then tapers down to the opening which is pretty narrow around 2". The fitment is a Tacoma, 4Runner, Prado. My FJ60 is getting a paint face lift this week, so I can't pop a rim off and see for myself. Bad part is I love the rim and would be pumped if they fit. Thoughts?
The center bore is my main concern they list it as 106.1 but it appears to start at 106.1 at the base then tapers down to the opening which is pretty narrow around 2". The fitment is a Tacoma, 4Runner, Prado. My FJ60 is getting a paint face lift this week, so I can't pop a rim off and see for myself. Bad part is I love the rim and would be pumped if they fit. Thoughts?
Last edited:
Thx for the reply, and yeah! That LS3 was such a game changer. Mine is my DD as well, and that power is just so much fun. Especially on those big hill climbs compared to the old engine. have not picked a set of new wheels yet, but soon!
@studawg , yeah, dragging up old $h!t. quick ? how did you like those p78's? considering them for my 60. thanks
Man I loved them. Wish they still made them in the larger sizes. I will say the 16x7 wheel I was running it on was too wide for that tire I think. When I aired down to hit the trails, I popped the bead, and if it had been a 16x6, I think I would have been good. I may have aired down a bit too much. But for that tire, I think a 7" wide wheel is too wide and 6" is just right.
cool. thanks for the quick reply man. also the heads up on possible wheel width. i generally run single digit pressures when wheelin'
Unless my eyes deceive me, your anti inversion rear shackles are up side down and could damage the leaf spring under full compression (can't see the front).
FirstFJ60
SGT. Lincoln Osiris
Do you think a 15x8 offset -19mm, with a BS of 3.75 will rub the tie rod?
FirstFJ60
SGT. Lincoln Osiris
16x8 Pro Comp 2.5" back spacing on 265/75 16 Toyo Open Country AT III.
Last edited:
Reverse mount?
@FirstFJ60
Can you post more pics and do you have a link to these on a website?
Can you post more pics and do you have a link to these on a website?
FirstFJ60
SGT. Lincoln Osiris
US wheels. I bought the wheels from a guy who stated they were a custom order for backspacing of 2.5". I dont know if they still do that sort of customization now.
Last edited:
Thanks for the info.. how those look are exactly what i am after.. want to get rid of spacer's
I've read people using the vintique smoothie in 16" rims without issue. Has anyone tried the 15x6?
www.summitracing.com
3.625" backspacing
Wheel Vintiques 12-5606358 Wheel Vintiques 12 Series Smoothie Wheels | Summit Racing
Free Shipping - Wheel Vintiques 12 Series Smoothie Wheels with qualifying orders of $109. Shop Wheels at Summit Racing.
Trying to decipher the wealth of info here to order a wheel.
The one i'm looking at is aluminum: 17x8.5, 6x139.7 Bolt Pattern, 0mm Offset, 4.75 Back Spacing, 106.2mm Hub bore
seems like from the info here it should fit. My truck currently has a 15" & i'm measuring 4.25" from the back of the wheel face to the rim (is that accurate backspacing?)
I'm assuming the added 1" of radius / 2" diameter would help the wheel clear the TRE?
Thanks for any help.
The one i'm looking at is aluminum: 17x8.5, 6x139.7 Bolt Pattern, 0mm Offset, 4.75 Back Spacing, 106.2mm Hub bore
seems like from the info here it should fit. My truck currently has a 15" & i'm measuring 4.25" from the back of the wheel face to the rim (is that accurate backspacing?)
I'm assuming the added 1" of radius / 2" diameter would help the wheel clear the TRE?
Thanks for any help.
same here....im sooooo lost. lol
I ordered a set of wheels - will update here and on my build thread w/specific findings!
