What have you done to your Land Cruiser this week? (52 Viewers)

[Skreddy]

I pulled a 2F apart and found out I need a new pair of rod bolts. Bearings should be fine with a 3 stone hone?

 

[Chungas Revenge]

I pulled a 2F apart and found out I need a new pair of rod bolts. Bearings should be fine with a 3 stone hone?View attachment 2977056View attachment 2977057

I think you could straighten those rod bolts out with a blow torch and a pair of Vice-Grips....Just say'en.

 

[JVZii]

Since I have bought almost every cluster that has been put up for sale over the last 3 years I have plenty of clusters that need be restored and put back into service. I created all the art work a while back but wasn't sure of a cost effective way to get the artwork to the faces.

After a bit of luck, I have figured out how gauge marks do/did this (not sure if they are in the fj40 business anymore.)

I may offer these as a kit if there is any interest. I am still working out some issues but it is getting close.

 

[1911]

I think you could straighten those rod bolts out with a blow torch and a pair of Vice-Grips....Just say'en.

What they would do in Columbia or Pakistan, and it would run afterwards.

 

[Chungas Revenge]

What they would do in Columbia or Pakistan, and it would run afterwards.

I've seen what can be done in the "Bazzar" with a bow saw, charcoal and determination...

 

[ENDO]

Went for a ride to wickiup reservoir in Oregon.

 

[waiting for time]

What they would do in Columbia or Pakistan, and it would run afterwards.

It would require a proper heat treatment or it will not run for long.

 

[cbmontgo]

View attachment 2977207

Since I have bought almost every cluster that has been put up for sale over the last 3 years I have plenty of clusters that need be restored and put back into service. I created all the art work a while back but wasn't sure of a cost effective way to get the artwork to the faces.

After a bit of luck, I have figured out how gauge marks do/did this (not sure if they are in the fj40 business anymore.)

I may offer these as a kit if there is any interest. I am still working out some issues but it is getting close.

Looks great. I am still tickled pink with the ‘77 cluster I bought from you last year. I’d been looking for the correct one for quite a while.

 

[Oregon FJ40]

Finished welding in the floor and rockers. Need another day to grind down welds and fill pin holes, then I can put primer on the tub.

 

[Vandal FJ]

Swapped out the drivetrain… a newer 350 (still old), 4 speed, and t case. And yes... that trans and t-case need some cleaning... but 3 years under the work bench made it hard to remember to drag it out!

 

[ToyotaMatt]

Heading out to fellow member @Rusto , THANKS for your support , Erin ans matt ......

75 BJ40

Fully restored in house at skunk-works LAB

Catch Me if u can 3-D technology….

 

[ToyotaMatt]

View attachment 2977207

Since I have bought almost every cluster that has been put up for sale over the last 3 years I have plenty of clusters that need be restored and put back into service. I created all the art work a while back but wasn't sure of a cost effective way to get the artwork to the faces.

After a bit of luck, I have figured out how gauge marks do/did this (not sure if they are in the fj40 business anymore.)

I may offer these as a kit if there is any interest. I am still working out some issues but it is getting close.

i have dabbled in SEMA-Spec. concept cluster work

yours looks KILLER KOOL and sharp as a arrow too , most excellent



- in the next month or so , the SKUNK-WORKS will be launching the very well thought out " YELLOW 100 " Project based on a Period Correct UNICORN non-usa

original .......


- i plan to absoluty give DAKAOTA DIGITAL a run for its money , and offer a unique all inclusive all parts kit included OEM period correct option folks who simply want

one ..


it's coming soon to a 40 Series SHOP near u

something wicked Kool this way comes

 

[blossett]

New harness arrived from JT Outfitters!!

 

[ToyotaMatt]

​

- this is a MUST watch T-TEN Technical Education SKUNK Works Exclusive as i go over SOME or most the confusion and try to bring some level headed clarity to

the TABLE here :


All the OEM OIL FILTER OPTIONs 101

​

 

[Vandal FJ]

New harness arrived from JT Outfitters!!

View attachment 2979749

Okay I have been looking at this kit, as well. I would be seriously interested in following your install!

 

[Chungas Revenge]

​

- this is a MUST watch T-TEN Technical Education SKUNK Works Exclusive as i go over SOME or most the confusion and try to bring some level headed clarity to

the TABLE here :


All the OEM OIL FILTER OPTIONs 101

​

Interesting vid Matt. 80$ for an oil filter?? Da#n skipper, that’s a princely sum…

 

[ToyotaMatt]

Interesting vid Matt. 80$ for an oil filter?? Da#n skipper, that’s a princely sum…

that's the standard comps i found on ebay

no affiliations with $80 nos 15600-41010 's


but some in life are greedy and well that's simply SAD ........

 

[120mm]

Instead of posting up my many tasks I accomplished on all my vehicles, here is my dream garage shot

 

[Ackcruisers]

Restored some parts for my new NLA parts museum.

 

[rkymtnflyfisher]

Restored some parts for my new NLA parts museum.
View attachment 2981788
View attachment 2981789View attachment 2981790
View attachment 2981793

Do you need my shipping info?