What have you done to your 200 Series this week? (19 Viewers)

[lostonaroad]

How much additional lift are you running out back vs stock?

Approx. 2.5"

 

[sleepycruiser]

Added the Dr. KDSS Panhard Correction Kit today.

Easy install that took about an hour and the ass end is much more planted on bumpy stuff, well worth it.

View attachment 3502728View attachment 3502727

View attachment 3502730
View attachment 3502733

Random…what paint do you use for the bolts for the tamper/security check?

 

[lostonaroad]

Random…what paint do you use for the bolts for the tamper/security check?

https://www.tractorsupply.com/tsc/product/permatex-bolt-mark-indicator-paste-21262-1599527?store=2661&cid=Shopping-Google-Local_Feed&utm_medium=Google&utm_source=Shopping&utm_campaign=&utm_content=Local_Feed&gad_source=1&gclid=Cj0KCQiA4NWrBhD-ARIsAFCKwWtH0WcnNxpUu0uD0yGfln4lWg4BMIZ6ebepA_0KjQ-CSVxPseyLgUwaAi2QEALw_wcB

I clean it up once it dries with a razor blade as its very goopy when it comes out.

 

[marketShark]

more pics of your truck please

 

[marketShark]

Which sliders are those?

White Knuckle

 

[ryanCA]

View attachment 3504914
View attachment 3504915

Beauty~ I have a picture of my FJC in that exact spot.

I am thinking of ordering the white knuckle with the flat metal piece of top for my truck. How hard was the install, since its not a bolt on?

The Budbuilt are almost 1700 and these are almost 600$ cheaper

 

[marketShark]

Beauty~ I have a picture of my FJC in that exact spot.

I am thinking of ordering the white knuckle with the flat metal piece of top for my truck. How hard was the install, since its not a bolt on?

The Budbuilt are almost 1700 and these are almost 600$ cheaper

PO installed them shortly before I bought the truck. I might be able to find the thread of his install here on MUD

 

[ryanCA]

PO installed them shortly before I bought the truck. I might be able to find the thread of his install here on MUD

would appreciate the assist

 

[marketShark]

would appreciate the assist

Went back through many threads to remind me that the PO actually took the pics for the install guide/ White Knuckle Website !

Hope these help:

https://forum.ih8mud.com/threads/white-knuckle-sliders-installed.878368/

Hey, I recognize that 200!

forum.ih8mud.com

Toyota 200 Series Land Cruiser Rock Sliders - White Knuckle Off Road Products

Includes the following features: 71" overall length maximizes coverage of the rocker from flare to flare while allowing for oversize tires and front mud flap 1/4" thick x 2" x 2" square tube main rub rail for greater foundational strength 1/4" thick x 1-1/2" square tube legs to limit flexing...

white-knuckleoffroad.com

 

[ryanCA]

Went back through many threads to remind me that the PO actually took the pics for the install guide/ White Knuckle Website !

Hope these help:

https://forum.ih8mud.com/threads/white-knuckle-sliders-installed.878368/

Hey, I recognize that 200!

forum.ih8mud.com

Toyota 200 Series Land Cruiser Rock Sliders - White Knuckle Off Road Products

Includes the following features: 71" overall length maximizes coverage of the rocker from flare to flare while allowing for oversize tires and front mud flap 1/4" thick x 2" x 2" square tube main rub rail for greater foundational strength 1/4" thick x 1-1/2" square tube legs to limit flexing...

white-knuckleoffroad.com

thank you!

 

[LvCruiserNewb]

Beauty~ I have a picture of my FJC in that exact spot.

I am thinking of ordering the white knuckle with the flat metal piece of top for my truck. How hard was the install, since its not a bolt on?

The Budbuilt are almost 1700 and these are almost 600$ cheaper

Should have gotten them during black friday they were another 15% off then. I didn't pull the trigger because I couldn't decide between them or budbuilt too. I'm pretty sure I don't need the stoutness of budbuilt buy I prefer to "buy once cry once" and opted to wait for my work bonus and get the budbuilts. Plus the WKOR require drilling your frame which I didn't want to mess with personally.

 

[ryanCA]

Should have gotten them during black friday they were another 15% off then. I didn't pull the trigger because I couldn't decide between them or budbuilt too. I'm pretty sure I don't need the stoutness of budbuilt buy I prefer to "buy once cry once" and opted to wait for my work bonus and get the budbuilts. Plus the WKOR require drilling your frame which I didn't want to mess with personally.

same I dont want to drill

I can wait till next year

 

[AZBoatHauler]

If they aren’t welded or drilled and bolted - are they sliders or just heavy steps?

 

[Bullgump]

I've run BB sliders and armor for 4 years and wouldn't hesitate to buy again. Bolt on (existing manufacturers holes) with no drilling and have taken a thorough beating and saved my rig from me being me.

 

[AZBoatHauler]

Can’t speak to what they put out for the 200 series but they include this disclaimer in the description of their truck “sliders” -

 

[tincan45]

Can’t speak to what they put out for the 200 series but they include this disclaimer in the description of their truck “sliders” -
View attachment 3505389

vs

His 200 stuff is heavy duty.

 

[Bullgump]

vs

His 200 stuff is heavy duty.

totally agree. Well worth the price of admission.

 

[Rawrear]

35x10.5r17’s on Method 703s +35. Need to clearance the wheel wells a little but I’m stocked with how it looks!
View attachment 3496284View attachment 3496289View attachment 3496290

is that an lx or a Lc?

What stuff did you do to make it fit?

 

[Supra Turbo]

is that an lx or a Lc?

What stuff did you do to make it fit?

Looks like LX judging by the headlights and integrated sidesteps.

 

[ryanCA]

totally agree. Well worth the price of admission.

thus for $1700, I am still waiting at the entrance gate