cc93cruiser
CRUZAHEAD
Nevermind, looked at pic a little bit harder..
What have you done to your 200 Series this week? (17 Viewers)
- Thread starter MScruiser
- Start date
-
- Tags
- 200 series
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Thanks @cc93cruiser! I'm digging the look myself. And just in case - the tires are 275/60R20's and they are beefy compared to the Michelins I had before but there is zero rubbing and I didn't have to modify anything or remove mud flaps.
cc93cruiser
CRUZAHEAD
Thinking bout that tire size or even 275/65/r20. Which would be same width, just 1" taller..Trying to see if anyone has these installed on their lx... Sure there is someone, just can't seem to find any pics of them installed..
supercarrera
Club Esprit de Four
I've got 275/65r20 Nitto Terra Grapplers. I like the size. I have no rubbing now but I'm running 3/4" spacers and I've done some minor adjustments to the fender liner and removed the mud flaps. There's a pic in the the other thread where I tried to fit 35x12.5r20's.
I'm in the South Bay. Let me know if you want to see them in person.
cc93cruiser
CRUZAHEAD
Seeing it in person would be awesome as I would get a good idea on what to remove and possibly trim.. Don't mind a little trimming on the plastic, but trimming on fender or the likes might make me rethink the tire size... Also, is wheel spacers absolutely necessary? I mean the width is still the same as stock tire, right?I've got 275/65r20 Nitto Terra Grapplers. I like the size. I have no rubbing now but I'm running 3/4" spacers and I've done some minor adjustments to the fender liner and removed the mud flaps. There's a pic in the the other thread where I tried to fit 35x12.5r20's.
I'm in the South Bay. Let me know if you want to see them in person.
A few of us including me are running that size and have posted pics in the LX thread and elsewhere. Just search “275/65/20” on this forum and you’ll find quite a few pics and questions/answers about that size.
Pre-road trip oil change with AMSOIL Signature Series 0W-20 & 15K interval filter.
Swapped out Venza aluminum oil filter cap with Jowett Performance 6-Point 2.5” Socket Design Aluminum Oil Filter Cap with Fumoto Valve. (Also added a spare socket for same to ARB drawer supplies.)
Replaced OEM incandescent bulbs (reading/dimes/doors) with SuperbrightLEDs.
Swapped out Venza aluminum oil filter cap with Jowett Performance 6-Point 2.5” Socket Design Aluminum Oil Filter Cap with Fumoto Valve. (Also added a spare socket for same to ARB drawer supplies.)
Replaced OEM incandescent bulbs (reading/dimes/doors) with SuperbrightLEDs.
marketShark
Spider 2 Y Banana
Installed new ARB IPF H11 LED head lights, a new SLEE ARB deluxe bar LED bracket, ARB LED indicators and Rigid D-Series LED fogs - very happy with the finished product!
Would love to see the rig in person some time -- I'm in your neck of the woods
I’m a big fan of using these rechargeable closet lights at camp:
I’ve been through every kind of Velcro and two sided tape but nothing worked super well.
This time I got some magnets with screw holes:
Mount to hatch * 4:
Let there be light!
Everything is evenly spaced to I can use the light in 3 positions but I will likely add a second one because two is better than one.
I’ve been through every kind of Velcro and two sided tape but nothing worked super well.
This time I got some magnets with screw holes:
Mount to hatch * 4:
Let there be light!
Everything is evenly spaced to I can use the light in 3 positions but I will likely add a second one because two is better than one.
Nope, is that a brewery I should check out?
It’s a beer at the Veil in Richmond. It’s one of the best, especially if you like New England style IPAs.
I was looking to hard wire a rear light and ended up going battery operated. Even cheaper: https://www.amazon.com/gp/product/B075YXDTB4
Initial install was with the metal magnet strip that came with it. Slammed the hatch and it fell off. Used Velcro to hold it in place against the window on the other side of the windshield wiper so that it does not block the view, but yet easy to remove the sticky tape if I decide to remove.
Initial install was with the metal magnet strip that came with it. Slammed the hatch and it fell off. Used Velcro to hold it in place against the window on the other side of the windshield wiper so that it does not block the view, but yet easy to remove the sticky tape if I decide to remove.
The magnets work great!
SQRRRL
SILVER Star
Nice work! I did the same. One large firing out of the LC and 2 firing in. Work great. I used OxyLED with magnets and they don’t fall off.
I made a TEQ coin.
