What have you done to your 100 Series this week? (53 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
2006 Cruiser: Removed running boards and changed oil, 7q of Mobil 1 and new filter. Anyone want my running boards from my 2006? I live in SoCal and will give them away to whoever wants to come get em'.
1996 Cruiser: replaced fan clutch with new one from AJIK (thanks Josh!).
1996 Cruiser: replaced fan clutch with new one from AJIK (thanks Josh!).
Nice dragon
My wood tream is faded too, this is a good solution,
Was it easy to install..
Sorry, power outage for the last 24 hours and no internet.
Kit was fairly easy to install. The parts are well cut, but I bought some additional trim to fill some gaps (around the radio and the center console middle part).
The kit has like 24 pieces. Some I had no clue where they were supposed to go so I left them off.
I installed the center console, dash board (around the radio and ac controls), left and right of steering wheel, around the air vents, electric window controls and the back of the center console.
Will try to take some pics this week.
dogdaysindurham
SILVER Star
Ditto. The OP is from Australia, so is your LC a solid front axle? I saw that there are different guards if its the IFS or the solid axle.
This is the closest I found beside the picture JustDifferentials posted in the vendor forum.
http://www.roadwerk.eu/TJMtoyota_100series.pdf
JTdifferentials picture.
https://forum.ih8mud.com/jts-parts-accessories/508547-tjm-products-now-stocking-pro-locker-more.html
nick, you putting your LED bar back on the cleaned up rack?
Wanted to do some work on the truck yesterday, but then a good friend of mine got rear-ended on the Pan-American Highway and I had to get him to the hospital:
He was doing better already:
But I bet he is aching today ...
He was doing better already:
But I bet he is aching today ...
man, that looks like quite an impact. What happeend exactly?
cboyd
GOLD Star
Big week for my Hundy! From completely stock to well down my list for the build:
2" lift using:
New OME Torsion bars
Rear OME 866 springs (hand me down from Lrowe_CSP!)
OME shocks all around
Slee Diff Drop
TJM - T3 Classique Front Bumper
Warn M8000 Winch with Wireless Control
Hella OptiLux 7" HID wired to Toyota OEM switch in the console
Slee Second Battery Tray
Prepped Yakima Roof Rack with custom mount for RTT. Will mount as soon as I get factory cross bars off!
Cleaned the Engine Cover and a lot of the hoses
Totally Stock
Front End View with Mods
I'll be selling off the stock stuff shortly!
2" lift using:
New OME Torsion bars
Rear OME 866 springs (hand me down from Lrowe_CSP!)
OME shocks all around
Slee Diff Drop
TJM - T3 Classique Front Bumper
Warn M8000 Winch with Wireless Control
Hella OptiLux 7" HID wired to Toyota OEM switch in the console
Slee Second Battery Tray
Prepped Yakima Roof Rack with custom mount for RTT. Will mount as soon as I get factory cross bars off!
Cleaned the Engine Cover and a lot of the hoses
Totally Stock
Front End View with Mods
I'll be selling off the stock stuff shortly!
Got any more pics of the T3 front? I've been thinking about getting one but there aren't many pics of them.
He was driving north on the Pan-American highway and had just picked up three backpackers who were sitting in the bed of the truck when he had to brake fairly hard because 4 cars had come to a stop in front of him and just when he come to a stop another car plowed in the back of his car - probably doing about 70-80 mph (no skid marks at all). His car got pushed onto the car in front of him and then went up in the air and rolled twice to finally land on its roof.
The three passengers in the bed were ejected, two got away with only a few bruises but one girl is in the hospital with head trauma.
The incoming car continued on to push the second car about 300 feet down the road and hit two more other cars. No other injuries.
cboyd
GOLD Star
Bamarock- I do have some more, I'll be posting them along with my comments on the bumper to the ARB vs TJM thread that I've been commenting on with some others. Bottom line: I like the bumper, but its got a few issues. One of which was some missing trim parts of which Slee is helping me get TJM to ship directly. Christo has been directly involved and very helpful!
This was last week, but I had to take the LC to the dreaded California smog test. This smog test has to be passed every two years. A dynamometer is used during testing all 2WD vehicles but 4WD/AWD vehicles are exempt from this requirement. Before handing over my keys at the test station I asked if a dynamometer would be used on my LC. I gave them the keys only after hearing a "no". The LC passed with no issues.
ordered a new radiator with fluid, new cap, clamps, etc....as mine started leaking last week. Should be fixed tomorrow. 
Just dropped it off to get the front locker installed... coming up next, installing the air compressor, switches, etc.
Who do you have doing the install for you?
Ordered the parts for the front sway bar refurbishment.
NM Gear (http://www.nmgear.com/). A recommendation on the local board, and from the other highly recommended gear shop.
I did as well
Thanks. Good to know. I may want to get a front locker and on board air one day...
Added a new horse to the stable. 03 76K, stock......for now. 99 got fresh oil/filter, spark plugs, fuel filter and tire rotation (33" nitto tg).
