What have you done to your 100 Series this week? (105 Viewers)

[mdkaboom]

What parts are these? could you list them out? I've been replacing everything I can think of in pursuit of the clunk (CVs, hub flanges, diff bushings, as well as UCAs). The last thing I can think of (outside of backlash in the diffs somewhere) is motor mounts.

Cushion: 41651-60010
Support Assy: 52380-60040
Stopper: 41653-60010
Support Assy: 52380-60030
Stopper: 41653-60020
transmission mount: 12371-50081
engine mounts (2x): 12361-50121

 

[Asanka]

Both mine and my buddy's got 24G LRA AUX tanks installed . Looking forward to cut stops in half!

 

[OEMGUY0720]

View attachment 3951884
Both mine and my buddy's got 24G LRA AUX tanks installed . Looking forward to cut stops in half!

ARB crew I had the same front deluxe bar + side rails with my D4D Hilux and ironically came in clutch from fender-benders several times driving in the city.

 

[LC Lurker]

Just finished up the install of the Ironman front bumper on my ‘04 LX470. Pretty straight forward install and it definitely upgraded the front end imho. Next up is a winch…View attachment 3951312View attachment 3951313View attachment 3951314View attachment 3951315

I gotta ask…tire size? Those look great.

Also the bumper really transformed the LX entirely, awesome addition to the truck.

 

[Asanka]

ARB crew I had the same front deluxe bar + side rails with my D4D Hilux and ironically came in clutch from fender-benders several times driving in the city.

Went with ARB because that's well tested and regulated in Ausi. ARB or TJM were my options from AUSI back in the day. There are more better looking stuff out there now though.

 

[Kingrich33]

I gotta ask…tire size? Those look great.

Also the bumper really transformed the LX entirely, awesome addition to the truck.

Thanks 275/70/18 KO3’s

 

[100d ua]

Six years owning my 100. Am I the only one that just found out there are cup holders in the back seat? Was just chilling in the backseat wondering what was behind the “caps” thinking how outrageous it is there are no cup holders and this thing pops out after prying it open with a flat head

 

[Landman2000]

Haha if you think thats cool wait until you see what’s behind the cap above the cup holders

 

[mokrunka]

Six years owning my 100. Am I the only one that just found out there are cup holders in the back seat? Was just chilling in the backseat wondering what was behind the “caps” thinking how outrageous it is there are no cup holders and this thing pops out after prying it open with a flat head

View attachment 3953268

I just figured out there's two MORE cupholders in the front, if you lift the upper section of the center console, on the underside of it is a plastic release that folds down a tray with 2 extra cupholders!!

 

[100d ua]

Haha if you think thats cool wait until you see what’s behind the cap above the cup holders

I opened that too. Nothing there. Just storage space for mags

 

[100d ua]

I just figured out there's two MORE cupholders in the front, if you lift the upper section of the center console, on the underside of it is a plastic release that folds down a tray with 2 extra cupholders!!

I know about that one but sadly mine didn’t have that option

 

[kiwijet]

New to the 100 series world. Just found this gem. Less than 48,000 miles from new in 2001. Paid a deposit and will collect soon. Must be one of the cleanest 100 series out there. Still has the original plastic covering the carpets and door panels from factory.
How much do you think I paid??

 

[hotdawwgman]

New to the 100 series world. Just found this gem. Less than 48,000 miles from new in 2001. Paid a deposit and will collect soon. Must be one of the cleanest 100 series out there. Still has the original plastic covering the carpets and door panels from factory.
How much do you think I paid??

View attachment 3953356

View attachment 3953361

View attachment 3953362

View attachment 3953363

Looks super Minty! Congratulations

 

[benznotmercedes]

Got the wheels and tires on.

17x9 +58 Lodio Drive Cinq from Japan
285/70/17 Kenda Klever AT2
25mm spacers

I’m sure this is obvious to most on this forum, but I didn’t know that the front hub bolts foul the hub centric lip on most spacers. I didn’t want to go to a 1.5” spacer because that would have been too much poke. Ended up having a buddy machine some relief cuts, and it worked great.

I did break a front wheel stud removing the stock wheels. Getting the hub/rotor off and separated and pounding out the old stud on a 368k mile truck from Wisconsin was a bitch!

Anyway, here she is.

 

[menancyandsam]

View attachment 3951884
Both mine and my buddy's got 24G LRA AUX tanks installed . Looking forward to cut stops in half!

How was the install?
Did you lose clearance?
How much?

Thanks in advance.

 

[flatsfishinfool]

Refoamed all of the speaker surrounds on the 6” speakers. All four doors and the subwoofer. Sounds like new….

Bled the breaks, got rid of the “southern” fender flares.