What have you done to your 100 Series this week? (42 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

geanes said:
Time for a write up on that sweet setup :) Excellent job.
Click to expand...

Thanks! And fair enough! I'll put together a parts list and write up on my build thread.

mesa man said:
That is a friggin awesome setup @LXColorado ! Great job!
Click to expand...

Thanks! Been looking for an easier air up/down method for a while, and I think I might've found the ticket.

MongooseGA said:
Badass. I had some pressurized bumpers/nitro taps on a Jeep build and was thinking it would be really cool if my ARB could do the same. Interested in your steps for sure.
Click to expand...

Thanks! It would be interesting to see how you'd plumb it, and how many gallons you'd manage to find! I've read people tapping in to their sliders, though, I think I'd rather find a place to stick an air tank if I needed that much air. So far, I haven't found a need for a tank. I'll put together a parts list, and do a write up in my build thread!
 
LXColorado said:
Thanks! And fair enough! I'll put together a parts list and write up on my build thread.



Thanks! Been looking for an easier air up/down method for a while, and I think I might've found the ticket.



Thanks! It would be interesting to see how you'd plumb it, and how many gallons you'd manage to find! I've read people tapping in to their sliders, though, I think I'd rather find a place to stick an air tank if I needed that much air. So far, I haven't found a need for a tank. I'll put together a parts list, and do a write up in my build thread!
Click to expand...
You are very creative and the off road manufacturing companies should take notes. Thank you for sharing 🙏🙏
 
ktmracer01 said:
@DJCloz I'll definitely be posting my feedback on the Sway Away TB's. My brother has an LX and he's relying on me to be the guinea pig for him to make a decision on what suspension setup he goes with. It'll be a couple of months though. I'm about to head back overseas for work and the TB's aren't scheduled to show up until after I leave.
Click to expand...


The SwayAway tb's were the best thing I've done to my AHC rig after bolting several hundred #'s onto it. I think mine have been on for a bit over a year now, and still all good. I have a thread somewhere around here (if you haven't seen it yet). Hit me up if you have any questions.

Looks like I lied about how long I've had them on... more like 5mos... I think...
 
Last edited:
1sar39 said:
The SwayAway tb's were the best thing I've done to my AHC rig after bolting several hundred #'s onto it. I think mine have been on for a bit over a year now, and still all good. I have a thread somewhere around here (if you haven't seen it yet). Hit me up if you have any questions.
Click to expand...

@1sar39 thanks for the feedback! I'll definitely do a search for your thread. I'm anxious to get them in when I get back.
 
ktmracer01 said:
@1sar39 thanks for the feedback! I'll definitely do a search for your thread. I'm anxious to get them in when I get back.
Click to expand...


Here ya go

forum.ih8mud.com

SwayAway TB's on built LX w/ AHC

So, heres a quick rundown of my 2004 LX. I have SPC UCA'S, bumpers, winch, sliders, drawers, roof rack, and 295/70/18's. I have about a 2" sensor lift, Japan 4x4 ahc spacers, King ktrs-79 springs with 30mm spacers in the rear, and had almost maxed out AHC tb's in the front. I ordered some...
forum.ih8mud.com forum.ih8mud.com
 
Went camping! And determined the rear springs are definitely up for replacement—was sitting probably 1” ass-low with five people and all the gear. Thinking about some Dobinsons variable rate 80 Series springs...
9C0FF36E-0E00-4C16-BB7D-EE41A0E06F73.jpeg
C2919ABE-4931-4F6B-8D8C-8CAB1C49A063.jpeg
 
Since many love the Amazon snorkel as a cheap arb clone i kept reading about the Ebay Awning arb clone and went for it at $130 for the 8x8 with included hardware. Plan to deploy at beach this weekend. Install took 15 minutes with an extra pair of hands (daughter). Many good reviews online and comparisons with Arb say its a direct clone but Arb has better build quality, 130 vs 350 i don't think that big of a difference.

Link for those interested.

rover.ebay.com

AplusChoice Car Tent Awning Rooftop SUV Truck Camping Travel Shelter Outdoor | eBay

Anti-UV & Water Resistant: Constructed of 420D oxford fabric with 2000mm PU coating and UV50+ protection, this awning gives you a cozy shelter to prevent harmful sun rays and drizzles, helping you enjoy camping, picnic and car travel.
rover.ebay.com


View media item 82998
View media item 82999
 
JakeTheSnakeNH said:
How’s your new wiper clear the outermost portion of the wiper radius? My new style is a bit weak on the outer edge. :/
Click to expand...
I had the same issue, so I went and bought a new longer blade, 16in replacement and it works great now. I believe the one that came with it was only a 14 so the patch it covers is larger as well.
 
Last edited:
abuck99 said:
Those look nice. Does the fabric breath a little?
Click to expand...
Thanks. These are the Dura EZ material. They fit and breathe well so far, but we're just getting into spring time here in PA, so I'll have to wait and see what the summer brings. All in all, very pleased with these seat covers.
 
Last edited:
LXstatic said:
You say front is next, have you located part #s for the upgrade?
Click to expand...

I didn't personally. I got the numbers from @Luke111 He did the work. The page in his thread is here
85222-53071
85212-0E020
 
You must log in or register to reply here.

Similar threads

C
What mods do you regret on your 100 series?
3 4 5
Replies
81
Views
14K
Berkut10r
Berkut10r
huuunnnt
What is the 100 Series stock ride height?
Replies
9
Views
520
Manhattan
Manhattan
G
I have a what does it go to question….
Replies
5
Views
449
oakback
O
H
What services should I get done to baseline LC?
2 3
Replies
46
Views
5K
Bisho
Bisho

Users who are viewing this thread

Total: 43 (members: 3, guests: 40)

Share this page

Back
Top Bottom