She’s a real looker, good luck! Life is a circle it comes back around.
What have you done to your 100 Series this week? (55 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I wish I saw this photo before I tacked this job last week!
This is one of those jobs where you do it once and you're a master of it forever. Pretty difficult the first time around though, if you ask me.
been cursing at it a lot. feel like it's starting to fall apart on me
How so?
in the last few months: u-joints, tie-rod ends, tensioner, serpentine belt, battery, entire sound system
Current major issue: Stalling on startup
Also hearing an increased number of rattles and clanks when I go over bumps, seemingly coming from the rear. Have gotten worse lately. Visual inspection didn't turn up anything amiss. There's also a vibration at about 70mph+ that feels like an unbalanced wheel, but I just had brand new tires installed, and the balance is good.
Oh, and as of yesterday I noticed that when I'm parked and idling sometimes there's a very subtle vibration of unknown origin.
Subtle vibration could be a slight misfire... Are you throwing any codes?
check engine isn't coming on, but I don't have a reader.
Do you have a comp tester?
I do not. Can you recommend one? I'm going out of town for a week, so I can order one from amazon.
Any one can work. I typically steer clear from Bosch but I have one of their simple compression testers and it works great.
I also have the same experience with the subtle vibration during idle. I was thinking it could be the engine or transmission mounts. And vehicle won't hold idle from time to time too. lol
Removed the flares today. I think a little touch up and some compound and should be good to go as far as getting rid of the rub lines.
While I have some downtime waiting on my laser cutter to finish up my new 100 series product, I finally got around to addressing my lack of onboard water and air.
4gallon air and 16 gallon water.
Total drop is 4". Looks like a lot more because the dissent rear is so high.
4gallon air and 16 gallon water.
Total drop is 4". Looks like a lot more because the dissent rear is so high.
Started pinstripe removal tonight which have probably been on the truck since new. Not coming off easily.Unfortunately I let the heat gun go too long on one area and I actually gouged a little of the paint by accident just under the mirror, so pissed about that one!!! Now I know what not to do....
View attachment 1691914 View attachment 1691915 View attachment 1691916
Bro, next time, use a wax wheel !
https://www.amazon.com/3M-Stripe-Off-Wheel/dp/B072T66N3P
I installed 1.5" Spidertrax spacers that I ordered from Slee. It sits so much prettier now!
You can also see how far inboard the front wheels were sitting after the lift.
Before:
After:
You can also see how far inboard the front wheels were sitting after the lift.
Before:
After:
There was a sale on Duratracs... so I dropped my spare for replacement and mount on the rear. Lost the little "key" so I spent about 40 mins with my arm cranked up around the spare to get at those 4 bolts that secure the whole lowering assembly. At how crusty it was, im not even sure that key would have mattered.
Finally took off running boards (Metaltech sliders arriving July) and plastidipped the grill as an experiment (it's still drying)
Before
After
Before
After
New OME 2863's in the rear today, and new brakes while I was there. I'll see how well this supports the weight of my rtt, water, and other camping gear.
