What Did You Do with Your 80 This Weekend? (44 Viewers)

[KzooCruiser]

I've done this more than once, . Now it's time for some liner! It hides a multitude of sins.

I told my buddy that this was my plan to cover it up! I may have to get on that!

 

[wantLCgotLX]

Re- the rhino-liner on the LX450


I was just thinking about this today on my LX450. I had some of the fender flares get ripped off at the carwash and I was thinking I would rip them all off, patch the holes and rhino-liner it. How much is a job like that?

 

[Cannon88]

I put 800 lbs of top soil in the back.

 

[VCCruzr]

Re- the rhino-liner on the LX450


I was just thinking about this today on my LX450. I had some of the fender flares get ripped off at the carwash and I was thinking I would rip them all off, patch the holes and rhino-liner it. How much is a job like that?

I know someone who got a rhino liner "bro deal" and it was $800, but all they did was use aluminum tape to cover the holes.

If you are willing to do this yourself, you can do it for under $300 and to not hijack this thread any further, check out my liner thread:

https://forum.ih8mud.com/80-series-tech/510501-finally-de-flaring-lx450.html

Derrick

 

[NLXTACY]

Re- the rhino-liner on the LX450

I was just thinking about this today on my LX450. I had some of the fender flares get ripped off at the carwash and I was thinking I would rip them all off, patch the holes and rhino-liner it. How much is a job like that?

Ditto on the aluminum tape. Here in the San Fernando valley there is a rhino liner shop in Sun Valley/Pacoima that quoted me $600 to do the entire water line AND interior of my 60. Must be in black and I have to remove all of the interior.

 

[Mr Cimarron]

Changed the drive belts. Started doing the rear heater bypass and crumbled the heater control valve in the process. Why is that thing made of plastic? After I get a new one I will conquer the PHH. Fun stuff.

 

[OGBeno]

Bought another 80.

Though this one will become something completely different.



Basically bought it for a good clean title, straight frame, and locking 3rd members.

$600.

Now I have to tow it back to SLC.

Thanks to BionicCruiser for getting it out of impound and Cdan for storing it at his place.

 

[94SRUNNER]

Nice score Onur!

I recently installed cloth seats in my 97' and am happy with the results. It is a nice departure from the leather.

 

[sethzilla]

Pics are waaaaaaay too big, can you make them a bit smaller?

i don't think anyone wants to see my ugly mug in a bigger pic BUT they can always click on them to be nauseated

 

[93yotasr5]

Found a cheap mega warrior basket.now looking for the extension.

 

[Stevesnj]

Made a one piece rear mat, fixed the rust above the windshield and put sealant around the windshield under the gasket. Prepping the roof for truckbed lining.

 

[Stevesnj]

Few more pics

 

[Mattnatti]

Pete, the seats look great. I cannot believe how well they match. Nice job Jason for finding him a nice set.

I had a busy weekend.

Removed OEM running boards in preparation for GOTHODGIE sliders.

Installed my new short bus.

Painted my REDNECK BELLY PAN

And installed.

I f'd up and installed the belly pan over the OEM so I had to loosen it ip and slide the oem out.
Really stout peace from Chad and Aaron.

Build thread coming soon.

 

[thatcabledude]

Made a one piece rear mat

Is that what they call "rubber stall mat" from Tractor Supply?

 

[Stevesnj]

Is that what they call "rubber stall mat" from Tractor Supply?

Nah, was an old piece of gym mat my school was going to throw out. 1" thick rubber.

 

[Wheelingnoob]

Installed Slee light harness, very nice improvement in light out put. More of a diffrence than the HIR upgrade did over stock. Installed Slee aux light harness and OEM switch for my lightforce 240's on the Newly installed ARB bumper. Light output is retarded, cant belive how much better my lighting setup is now.

Installed a Slee dual battery monitor, liked how simple it was and easy to install/setup.

Did not get around to re assembling the M12000 or installing it. I also got a Slee in cab winch controle to utilize my non used antenna up/down switch. Not installed yet.

 

[AMMO]

Installed four LED bars on my rack. One 41" across the front, and three 6" bars to cover the sides and rear. Ran the bars last night for some SAR work and was really happy with the light throw.



6" bars



41" bar spot / flood combo

 

[dontblink]

Nah, was an old piece of gym mat my school was going to throw out. 1" thick rubber.

Nice.

What town are you from? I laughed out loud when I read your location.

South Jersey- the other state.

Bahaha

 

[dontblink]

Got my hood louver panels installed (finally).

 

[Stevesnj]

Nice.

What town are you from? I laughed out loud when I read your location.

South Jersey- the other state.

Bahaha

Near Philly